Windows for Workgroups v3.11
Introduction:
-------------
This document describes the procedure to install Microsoft Windows
for Workgroups v3.11 driver for the PCMCIA Ethernet adapter.
You must run Socket/Card services device driver and/or Enable program
before you invoke any Ethernet driver. For the detailed information on
how to insatll PCMCIA driver, please refer to the User's Manual or the
"About PCMCIA" section in README file.
LOCATION OF DRIVER: \WFW311\PCNDIS.386
Setup Procedure:
----------------
After you run into Windows for Workgroup 3.11:
1. Select the "Network Setup" icon in the Network Group.
2. Click on the "Drivers..." button.
3. If you are replacing a previous LAN adapter, select the Remove
button to delete that adapter.
4. Click on the "Add Adapter" button.
5. Choose Unlisted or Updated Network Adapter.
6. Insert the adapter driver disk in drive "A" and specify the path
A:\WFW311 for the location of the driver.
7. Close, and when prompted, restart your computer so that changes
take affect.
NOTES:
------
1. Sample PROTOCOL.INI:
Windows for Workgroups creates the PROTOCOL.INI for you. This is
provided for reference. This is a sample with Microsoft Netbeui
and IPX/SPX Compatible Transport with Netbios.
[network.setup]
version=0x3110
netcard=PCCARD,1,PCCARD,3
transport=ms$nwlinknb,NWLINK
transport=ms$ndishlp,MS$NDISHLP
transport=ms$netbeui,NETBEUI
lana0=PCCARD,1,ms$netbeui
lana1=PCCARD,1,ms$nwlinknb
lana2=PCCARD,1,ms$ndishlp
[protman]
DriverName=PROTMAN$
PRIORITY=MS$NDISHLP
[PCCARD]
DriverName=PCNDIS$
[PCNDIS]
Adapters=PCCARD
[NWLINK]
BINDINGS=PCCARD
[MS$NDISHLP]
DriverName=ndishlp$
BINDINGS=PCCARD
[NETBEUI]
DriverName=netbeui$
SESSIONS=10
NCBS=12
BINDINGS=PCCARD
LANABASE=0
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.