1. ne100txe.exe Driver
2. README.TXT File Contents

README.TXT Driver File Contents (ne100txe.exe)

LAN Manager Server
------------------

    Introduction:
    -------------
    This document describes the procedure to setup LAN  Manager 2.X
    Server driver for SOHOware Fast/NE100TX-E Fast Ethernet Card.

    Location of Driver: \MSLANMAN.OS2\DRIVERS\ETHERNET\NE100TX\NE100TX.OS2


    Sample Configuration Files:
    ---------------------------
       CONFIG.SYS (will contain):

           DEVICE=C:\LANMAN.OS2\DRIVERS\PROTMAN\PROTMAN.OS2 /I:C:\LANMAN.OS2
           DEVICE=C:\LANMAN.OS2\DRIVERS\ETHERNET\NE100TX\NE100TX.OS2


       PROTOCOL.INI (will contain):

          [NE100TX_NIF]
          ; PROTOCOL.INI SAMPLE

            DriverName = NE100$

    Setup Procedures:
    -----------------
       Before you start with the installation process, make sure that the
       adapter  is properly  installed and  configured.  Make  sure  your
       Microsoft LAN Manager is properly installed.

       1. Run the appropriate Microsoft Lan Manager SETUP for computer you
          are setting up.(OS/2 Server). Select "Configuration"
          item ,(the SOHOware Fast/NE100TX-E Ethernet Card driver isn't
          included on the Lan Manager disk) and insert the SOHOware
          Fast/NE100TX-E Ethernet Card driver disk, select the "NE100TX-E PCI
          Fast Ethernet Adapter" and follow the directions.

       2. When completed, reboot your computer .

    NOTES:
    ------

       Sample PROTOCOL.INI for LAN Manager:

            [PROTMAN]
            DRIVERNAME = PROTMAN$
            DYNAMIC = YES
            PRIORITY = NETBEUI

            [NETBEUI_XIF]
            Drivername = netbeui$
            SESSIONS = 6
            NCBS = 12
            BINDINGS = "NE100TX_NIF"
            LANABASE = 0

            [NE100TX_NIF]
            ;
            ; PROTOCOL.INI Sample Adapter
            ;
            DriverName = NE100$

-----------------------[ END ]--------------------------