LAN Server 2.0 Server Installation
===================================
Location of Driver: \NDIS.OS2\NE100TX.OS2 (for OS/2 LAN Server)
1) Copy NE100TX.OS2 and NE100TX.NIF files from SOHOware Fast/NE100TX-E
Driver diskette to C:\IBMCOM\MACS.
2) Click the OS/2 LAN Service icon.
3) Select "OS/2 LAN Servise Installation/Configuration". The IBM logo
should appear onscreen.
4) Click <OK>.
5) Select <Advance> and press <Enter>.
6) Select "Install or Configuration this Workstation."
7) Select server type, adding a server or domain controller. The
"install or remove" selections should appear.
8) Select "Configure a component."
9) Click the "Configure" button.
10) Select "Configure workstation."
11) Select "NE100TX-E PCI Fast Ethernet Adapter" when prompted to
identify your Network Adapter. Then click the <Add> button.
12) Select IBM OS/2 NETBIOS and IBM IEEE 802.2 protocols from the list
and click the <Add> button.
13) Select <OK> to confirm all selections.
14) Follow screen instructions to complete the process, selecting
<OK> to accept default selections.
15) Continue pressing <OK> until your screen prompts you to backup
old CONFIG.SYS and AUTOEXEC.BAT and create a new CONFIG.SYS
and AUTOEXEC.BAT. Also select <OK> to confirm this.
16) Installation is complete now. Reset your PC by turning it off and on.
LAN Server 3.0 Server Installation
===================================
Location of Driver: \NDIS.OS2\NE100TX.OS2 (for OS/2 LAN Server)
Installation
1) Install the SOHOware Fast/NE100TX-E Ethernet Adapter on your PC system,
following the procedure to install IBM LAN Server.
2) Install your LAN Server network system on your hard disk.
3) At the C:\IBMCOM prompt, type "LAPS" and press <Enter>
4) Select "Install" and insert the Distribution Diskette that includes
the NDIS driver for IBM LAN Server 3.x to any floppy drive, e.g.,
A:, to install the driver.
5) When prompted to specify the source of the network information file
(.NIF files) for the adapter drivers you want to install, type
"A:\NDIS.OS2" and select OK.
6) When the Insatllation Complete window appears, select OK.
Configuration
1) When the main screen appears, select "Configure".
2) When the Configuration windows is displayed, select "Continue",
then the Configure workstation windows will appear.
3) Select "NE100TX-E PCI Fast Ethernet Adapter" when prompted to
identify your Network Adapters. Then click the <Add> button.
4) Select IBM OS/2 NETBIOS and IBM IEEE 802.2 protocols from the list
and click the <Add> button.
5) Select OK to save changes, or select Cancel to exit without saving.
6) Select OK to return to the main menu.
7) Select Exit to exit. The configuration utility will update your
CONFIG.SYS automatically. Follow screen instructions to complete
the process.
8) Installation is complete now. Reset your PC by turning it off and on.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.