Sun PC-NFS
----------
The SOHOware Fast/NE100TX-E Ethernet Card's NDIS 2.01 driver can also be
used with the Sun PC-NFS(version 5.x) environment.
Follow the steps listed below:
------------------------------
1 Be sure PC-NFS is installed on your system and configured for an NDIS
2.01 driver. See the PC-NFS Installation Procedure Manuals for more
information.
2 Run "NSFCONF". Select "Adapter" Menu. Select "Ethernet". Select "NDIS".
3 Insert the PC-NFS QUIKNDIS diskette into the floppy drive. Change to
the drive containing the QUIKNDIS diskette (e.g., "A:\").
4 At the prompt type:
QUIKNDIS
Then press <Enter>.
5 A message will appear asking for the current boot drive. Enter the
current boot drive and then press <Enter>.
6 Press "Y" to save the current "PROTOCOL.INI" file as "PROTOCOL.OLD".
Ignore this step if this dialog box does not appear.
7 In the "Adapter Card List" box, select the "Custom" option to install
the SOHOware Fast/NE100TX-E Ethernet Card's NDIS driver for
PC-NFS.
8 Remove the QUIKNDIS disk from the floppy drive. Insert the
SOHOware Fast/NE100TX-E Ethernet Card's driver diskette into the
floppy drive.
9 Follow the dialog boxes and enter the correct driver and path on the
SOHOware Fast/NE100TX-E Ethernet Card's driver diskette to
install the NDIS driver (e.g., "A:\NDIS.DOS\").
10 Enter "NE100TX" for the NIF file name and then press <Enter>.
11 Make the appropriate changes to "CONFIG.SYS" and "AUTOEXEC.BAT".
12 Reboot your system.
The installation of the NDIS 2.01 driver for PC-NFS is now complete.
ÿ
-------------------------------------[END]--------------------------------------
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.