NDC ND5300 Plug and Play Ethernet Adapter
MDI Driver for SCO UNIX V3.x
=====================================================
The following files will be used in this installation:
Files Contents
----------- -----------------------------------------
readme.doc This file.
driver.o NDC ND5300 PnP Driver Program
setup Transfer dos format to unix format setup program
info Used by netconfig
init Used by netconfig
master Used by netconfig
node Used by netconfig
reconf Used by netconfig
remove Used by netconfig
space.c Used by netconfig
system Used by netconfig
---------------------------------------------------------
INSTALLATION PROCEDURE
1. Login as root user. (On maintenance mode)
2. Installation Diskette in DOS format.
Put "NDC Setup diskette" to floppy A: and use doscp
command to copy ND5300 SCO UNIX PnP Driver into UNIX's directories.
# cd /
# doscp A:/sco/3.x/setup /setup
# chmod +x /setup
# ./setup
4. Use netconfig utility (after SCO UNIX Release 3.2 V 4.2)
Available options:
# netconfig
1) Add a chain
2) Remove a chain
3) Reconfigure an element in a chain
4) Quit Select 1. Add a chain
(b) No netconfig utility (before SCO UNIX Release 3.2 V 4.2)
# cd /pnp
# ./install
5. Select top level of chain to Add or q to quit: 4. sco_tcp
(SCO TCP/IP for UNIX)
6. Select next level of chain to Add or q to quit: Select ND5300 PnP Family
Ethernet Driver board 0
7. Add chain sco_tcp -> pnp0 (y/n) type 'y'
8. Enter the internet Address of this interface n.n.n.n
9. Enter the netmask for this interface (default 255.255.255.0)
10. Does the interface use a broadcast address of all 1's (y/n) default : y
11. Enter the broadcast address for this interface default: n.n.n.n
12. Are these values correct ? (y/n) y
13. Pseudo ttys are currently configured, do you want to:
1) Add Pseudo ttys
2) Remove Pseudo ttys
Select an option or enter q to quit [q] q
14.Available options:
1) Add a chain
2) Remove a chain
3) Reconfigure an element in a chain
q. Quit Select option: q
15. Do you want to relink to kernel now ? y
16. Do you want this kernel to boot by default (y/n) y
17. Do you want the kernel environment rebuilt (y/n) y
18. Reboot unix
# shutdown -y -g0
NDC ND5300 Plug and Play Ethernet Adapter
MDI Driver for SCO UNIX V4.x
=====================================================
The following files will be used in this installation:
Files Contents
----------- -----------------------------------------
driver.o NDC ND5300 Driver Program
setup Transfer dos format to unix format setup program
info Used by netconfig
init Used by netconfig
master Used by netconfig
node Used by netconfig
reconf Used by netconfig
remove Used by netconfig
space.c Used by netconfig
system Used by netconfig
INSTALLATION PROCEDURE
1. Login as root user. (On maintenance mode)
2. (a) Installtion Diskette in UNIX format.
# custom
Select Install
Select A New Product
Select entire to install all of the packages
(b) Installation Diskette in DOS format.
Put "NDC ND5300 Setup diskette" to floppy A: and use doscp
command to copy ND5300 SCO UNIX PnP Driver into UNIX's directories.
# cd /
# doscp A:/sco/4.x/setup /setup
# chmod +x /setup
# ./setup
4. Use netconfig utility
Avaiable options:
# netconfig
1) Add a chain
2) Remove a chain
3) Reconfigure an element in a chain
4) Quit Select 1. Add a chain
5. Select top level of chain to Add or q to quit: 4. sco_tcp
(SCO TCP/IP for UNIX)
6. Select next level of chain to Add or q to quit: Select ND5300 PnP Family
Ethernet Driver board 0
7. Add chain sco_tcp -> pnp0 (y/n) type 'y'
8. Enter the internet Address of this interface n.n.n.n
9. Enter the netmask for this interface (default 255.255.255.0)
10. Does the interface use a broadcast address of all 1's (y/n) default : y
11. Enter the boardcast ad*ress for this interface default: n.n.n.n
12. Are these values correct ? (y/n) y
13. Pseudo ttys are currently configured, do you want to:
1) Add Pseudo ttys
2) Remove Pseudo ttys
Select an option or enter q to quit [q] q
14.Available options:
1) Add a chain
2) Remove a chain
3) Reconfigure a element in a chain
q. Quit Select option: q
15. Do you want to relink to kernel now ? y
16. Do you want this kernel to boot by default (y/n) y
17. Do you want the kernel environment rebuilt (y/n) y
18. Reboot unix
# shutdown -y -g0
NDC ND5300 Plug and Play Ethernet Adapter
MDI Driver for SCO UNIX V5.x
=====================================================
The following files will be used in this installation:
Files Contents
----------- -----------------------------------------
Driver.o NDC ND5300 MDI Driver Program
setup Transfer dos format to unix format setup program
Master Used by netconfig
System Used by netconfig
Node Used by netconfig
Space.c Used by netconfig
space.h Used by netconfig
lkcfg Used by netconfig
AOF/r2e Used by netconfig
INSTALLATION PROCEDURE
1. Installation Diskette in DOS format.
Put "NDC ND5300 Setup diskette" to floppy A: and use doscp
command to copy ND5300 SCO UNIX Driver into UNIX's directories.
# cd /
# doscp A:/sco/5.x/setup /setup
# chmod +x /setup
# ./setup
2. Use netconfig utility
Avaiable options:
# netconfig
3. To add adapters, select "Add New Lan Adapter" from "Hardware".
4. Add Protocol to select SCO TCP/IP.
5. Enter the internet Address of this interface n.n.n.n
6. Enter the netmask for this interface (default 255.255.255.0)
7. Enter the boardcast address for this interface default: n.n.n.n
8. Do you want to relink to kernel now ? y
9. Do you want this kernel to boot by default (y/n) y
10. Do you want the kernel environment rebuilt (y/n) y
11. Reboot unix
# shutdown -y -g0
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.