NDC ND5300 Plug and Play Ethernet Adapter
NDIS Driver for SUN PC-NFS Installation
=================================================
PRE-INSTALLATION
You should setup and diagnose the Instant-Link adapter(s) by
applying NDCONF3 before you install and/or run the NOS or
network applications.
INSTALLATION PROCEDURE
1) Insert the "NDC Setup diskette" into drive A: and copy the ND5300
NDIS driver to the destination subdirectory on your PC (the
recommended Destination Subdirectory is C:\LANMAN).
A:\> Copy A:\NDIS2\ND5300.DOS C:\LANMAN
2) Insert the "Installation and Connections" diskette into drive A: or
B: .
3) Go to drive A: or B: and type: "INSTALL" and press <Enter>.
4) Specify the destination drive letter (usually C) and press <Enter>.
5) Specify "Ethernet" and press <Enter>.
6) Select the "NDIS" option.
7) Follow the screen prompts to copy the PCNFS files to your
destination drive.
8) When prompted, press <Enter> to configure PCNFS.
9) Specify the PC name, IP address, server name, and server IP
address. If you need assistance, refer to the "Configuring
PC-NFS" section of your Sun PC-NFS Installation Guide.
10) Follow the screen prompts to complete the installation.
11) When the installation is complete, select Quit to exit the
configuration program, defer the boot, and return to DOS.
12) Using any text editor, add the following line above the
NFS_NDIS.SYS driver specification in your CONFIG.SYS file:
device=c:\lanman\ND5300.DOS
Note: The 'c:' shown in the line above indicates the
destination drive you selected during the PCNFS installation.
13) Use any text editor to edit the PROTOCOL.NFS file in the
\LANMAN subdirectory in your Destination Directory:
- Replace:
[YOUR-MAC-MODULE]
with:
[ND5300_NIF]
- Replace:
drivername = yourmac$
with:
drivername = ND5300$
- remove:
option1 = value1 etc.
- Replace:
bindings = YOUR-MAC-MODULE
with:
bindings = ND5300_NIF
- Locate the file PROTOCOL.NFS in the \LANMAN subdirectory on
your destination drive and rename it as PROTOCOL.INI. Refer to
your DOS manual if you need assistance.
- Add the following NETBIND statement just before the NFS RUN
statement in your AUTOEXEC.BAT file:
C:\LANMAN\NETBIND
NFSRUN
Note: The 'C:' shown in the line above indicates the
destination drive you selected during the PCNFS installation.
14) Reboot the computer.
15) Execute NFSCONF.EXE to configure system (i.e. Mount a virtual
driver E:). Execute TELNET.EXE to do terminal emulation.
Following are the sample configuration files:
CONFIG.SYS:
SHELL=C:\COMMAND.COM /P /E:526
DOS=HIGH, UMB
rem ----pcnfs install
DEVICE=C:\DOS\ANSI.SYS
DEVICE=C:\NFS\PCNFS.SYS /m
DEVICE=C:\NFS\SOCKDRV.SYS
DEVICE=C:\LANMAN\PROTMAN.SYS /i:C:\LANMAN
DEVICE=C:\LANMAN\ND5300.DOS
DEVICE=C:\LANMAN\NFS-NDIS.SYS
FILES=50
BUFFERS=50
LASTDRIVE=v
STACKS=9,256
PROTOCOL.INI at \LANMAN directory:
[PROTOCOL MANAGER]
DRIVERNAME = PROTMAN$
[ND5300_NIF]
DRIVERNAME = ND5300$
[NFS-NDIS]
DRIVERNAME = NFSLINK1
BINDING = ND5300_NIF
AUTOEXEC.BAT:
...
SET TZ=PST8
SET PATH=C:\;C:\NFS;C:\LANMAN
SET NFSDRIVE=D
C:\LANMAN\NETBIND
PRT *
NFSRUN
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.