NDC ND5300 Plug and Play Ethernet Adapter
NDIS Driver for IBM PC LAN Program Workstation Installation
===========================================================
PRE-INSTALLATION
You should setup and diagnose the Instant-Link adapter(s) by
applying NDCONF3 before you install and/or run the NOS or
network applications.
INSTALLATION PROCEDURE
1) At the DOS prompt, insert the IBM LAN Support Program (LSP)
Version 1.30 (or later) diskette.
2) Type: DXMAID
3) Press the <Enter> key three times.
The Environment Information screen appears.
4) Specify the following values for the fields on this screen:
Configuration for this computer? Yes
Use existing configuration information? No
Do you have adapter option diskettes? Yes
Are you configuring for two adapters? No
Source for LSP A:\
Target for new configuration C:\lsp
5) Press <Enter> to store your choices.
The program prompts you to install the option diskette.
6) Insert the "NDC Setup diskette" in your source drive and specify
the path: A:\LANSRV.DOS
7) Press <Enter>.
The necessary files are copied from the "NDC Setup diskette"
to your target directory on your computer's hard disk.
8) Press <Enter> three times.
9) Insert the LSP diskette and press <Enter>.
The "Current Configuration" screen appears with the "ND5300
Plug and Play Ethernet Adapter" and protocols already selected.
10) Press <F4>. LSP is installed.
11) Use any text editor to edit the CONFIG.SYS file. Specify at
least 20 files in the FILES= line; for example:
files=20
Once you save your CONFIG.SYS, reset your computer.
12) Insert the PC LAN Install Diskette.
13) Type: INSTALL
14) Press <Enter>.
15) Press <Enter> three more times.
16) Select the level of function for this workstation, either
"Basic Services" or "Extended Services". Most of the time,
select the second option.
17) Specify "Workstation".
18) Specify either "Send messages" or "Send, receive, and log
messages" options. Most of the time, select the second option.
19) Specify the target path for the PC LAN files. The default
pathname is C:\DOS.
20) Specify the machine's ID and the domain ID. The domain ID must
be the domain server ID and must be the same for all
workstations on the network.
21) Follow the prompts to complete the installation until you
reach the "Change System Configuration File" screen. Usually,
you should accept the default for the system configuration
file.
The "Change System Batch File" screen appears. Usually you
should accept the default.
NDC ND5300 Plug and Play Ethernet Adapter
NDIS Driver for IBM PC LAN Program Server Installation
======================================================
PRE-INSTALLATION
You should setup and diagnose the Instant-Link adapter(s) by
applying NDCONF3 before you install and/or run the NOS or
network applications.
INSTALLATION PROCEDURE
1) At the DOS prompt, insert the IBM LAN Support Program (LSP)
Version 1.30 (or later) diskette.
2) Type: DXMAID
3) Press the <Enter> key three times.
The Environment Information screen appears.
4) Specify the following values for the fields on this screen:
Configuration for this computer? Yes
Use existing configuration information? No
Do you have adapter option diskettes? Yes
Are you configuring for two adapters? No
Source for LSP A:\
Target for new configuration C:\lsp
5) Press <Enter> to store your choices.
The program prompts you to install the option diskette.
6) Insert the "NDC Setup diskette" in your source drive and specify
the path: A:\LANSRV.DOS.
7) Press <Enter>.
The necessary files are copied from the "NDC Setup diskette"
to your target directory on your computer's hard disk.
8) Press <Enter> three times.
9) Insert the LSP diskette and press <Enter>.
The "Current Configuration" screen appears with the "ND5300
Plug and Play Ethernet Adapter" and protocols already selected.
10) Press <F4>. LSP is installed.
11) Use any text editor to edit the CONFIG.SYS file. Specify at
least 20 files in the FILES= line; for example:
files=20
Once you save your CONFIG.SYS, reset your computer.
12) Insert the PC LAN Install Diskette in your computer's diskette
drive.
13) Type: INSTALL
14) Press <Enter>.
15) Press <Enter> three more times.
16) Select the level of function for this workstation, either
"Basic Services" or "Extended Services". Most of the time,
select the second option.
17) Specify "Server".
18) Specify either "Send messages" or "Send, receive, and log
messages" options. Most of the time, select the second option.
19) Specify the target path for the PC LAN files. The default
pathname is C:\DOS.
20) Specify the machine's ID and the domain ID. The domain ID must
be the domain server ID and must be the same for all
workstations on the network.
21) Follow the prompts to complete the installation until you
reach the "Change System Configuration File" screen. Usually,
you should accept the default for the system configuration
file.
The "Change System Batch File" screen appears. Usually you
should accept the default.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.