NDC ND5300 Plug and Play Ethernet Adapter
NDIS Driver for IBM OS/2 LAN Server 2.0/3.0 DOS LAN Requester Installation
==========================================================================
Location of Driver: \LANSRV.DOS\ND5300.DOS (for DOS LAN Services)
PRE-INSTALLATION
You should setup and diagnose the Instant-Link adapter(s) by
applying NDCONF3 before you install and/or run the NOS or
network applications.
INSTALLATION PROCEDURE
1) Insert the IBM LAN Support Program (LSP) Version 1.30 (or 1.31)
Diskette into your floppy drive A: .
2) Type A:\dxmaid and press <Enter>.
3) The screen will display the IBM logo. Press <Enter> twice until
the "Environment Information" appears on screen.
4) Responds to the screen prompts, specifying the following values
for each field,use the <Space Bar> to toggle between choices:
Configuration for this computer? Yes
Use existing configuration information? Yes
Do you have adapter option diskettes? Yes
Are you configuring for two adapters? No
Do you need 802.2 interface support? Yes
Source for LSP A:\
Target for new configuration C:\lsp
Make sure that the values given above are correct, then press
<Enter> to store your choices.
5) Insert the "NDC ND5300 driver diskette" in floppy A,and specify
your pathname A:\LANSRV.DOS,then press ENTER.
6) Follow screen instructions to complete the process. Simply
pressing <Enter> for each screen display will select the default
options. Press <Enter> until you reach the display prompting you
to insert the LSP diskette.
7) Insert the LSP diskette as prompted. Press <Enter> to acknowledge
completion of the action.
8) A screen showing the current configuration detected will be
displayed. It should show the "ND5300 Plug and Play Ethernet Adapter"
and the protocols already selected (i.e., "IBM IEEE 802.2" and
"IBM OS/2 NETBIOS").
9) Press <F4>. to save the new configuration. This completes the LSP
installation.
10) Save the configuration and reboot your computer.
11) Insert the DOS LAN Requester Install Diskette 1 into your floppy
drive.
12) Type A:\INSTALL <Enter>
13) The IBM logo will again appear on the screen. Press <Enter> to
move on to the next screen.
14) Follow screen instructions, pressing <Enter> to move from
screen-to-screen until you are prompted to indicate the pathname
of the DOS LAN Requester directory (C:\DOSLAN ).
15) Specify the pathname (C:\DOSLAN is the default) for the DOS LAN
Requester directory . Then press <Enter> to continue.
16) The program will ask you for the services that you require.
17) Highlight the appropriate option. Select either "Send messages"
or "Send, View, Edit, and Log message" option. (Normally, second
option "Send, View, Edit and Log message" is selected).
18) Specify the PC's ID and domain ID.
19) Follow screen prompts to complete the installation.
Note :
-----
DOS version must be bellow DOS 5.0 when installing DOS LAN requester
into your DOS system.
NDC ND5300 Plug and Play Ethernet Adapter
NDIS Driver for IBM OS/2 LAN Server 2.0 Server Installation
==============================================================
Location of Driver: \LANSRV.OS2\ND5300.OS2 (for OS/2 LAN Server)
1) Copy ND5300.OS2 and ND5300.NIF files from "NDC ND5300 Driver diskette"
(\LANSRV.OS2) to C:\IBMCOM\MACS.
2) Click the OS/2 LAN Service icon.
3) Select "Installation and configuration". The IBM logo should
appear onscreen.
4) Click <OK>.
5) Select <Advance> and press <Enter>.
6) Select "Install or Configuration this Workstation."
7) Select server type, adding a server or domain controller. The
"install or remove" selections should appear.
8) Select "Configure a component."
9) Click the "Configure" button.
10) Select "Configure workstation."
11) Select "ND5300 Plug and Play Ethernet adapter" when prompted to
identify you Network Adapter. Then click the <Add> button.
12) Select IBM OS/2 NETBIOS and IBM IEEE 802.2 protocols from the list
and click the <Add> button.
13) Select <OK> to confirm all selections.
14) Follow screen instructions to complete the process, selecting
<OK> to accept default selections.
15) Continue pressing <OK> until your screen prompts you to backup
old CONFIG.SYS and AUTOEXEC.BAT and create a new CONFIG.SYS
and AUTOEXEC.BAT. Also select <OK> to confirm this.
16) Installation is complete now. Reset your PC by turning it off
and on.
NDC ND5300 Plug and Play Ethernet Adapter
NDIS Driver for IBM OS/2 LAN Server 3.0 Server Installation
==============================================================
==============================================================
Location of Driver: \LANSRV.OS2\ND5300.OS2 (for OS/2 LAN Server)
1. Installion
1) Install the ND5300 Adapter on your PC system, following the
procedure to install IBM LAN Server.
2) Install your LAN Server network system on your hard disk.
3) At the C:\IBMCOM prompt, type "LAPS" and press <Enter>
4) Select "Install" and insert the Distribution Diskette that includes
the NDIS driver for IBM LAN Server 3.x to any floppy drive, e.g.,
A:, to install the driver.
5) When prompted to specify the source of the network information file
(.NIF files) for the adapter drivers you want to install, type
"A:\LANSRV.OS2" and select OK.
6) When the Insatllation Complete window appears, select OK.
2. Configuration
1) When the main screen appears, select "Configure".
2) When the Configuration windows is displayed, select "Continue",
then the Configure workstation windows will appear.
3) Select "ND5300 Plug and Play Ethernet Adapter" when prompted to
identify your Network Adapters. Then click the <Add> button.
4) Select IBM OS/2 NETBIOS and IBM IEEE 802.2 protocols from the list
and click the <Add> button.
5) Select OK to save changes, or select Cancel to exit without saving.
6) Select OK to return to the main menu.
7) Select Exit to exit. The configuration utility will update your
CONFIG.SYS automatically. Follow screen instructions to complete
the process.
8) Installation is complete now. Reset your PC by turning it off
and on.
NDC ND5300 Plug and Play Ethernet Adapter
NDIS Driver for IBM OS/2 LAN Server 4.0 DOS LAN Requester Installation
==============================================================
Location of Driver: \LANSRV.DOS\ND5300.DOS (for DOS LAN Services)
* LAN Server 4.0 Installation (Using OEMSETUP.INF with DLS Installation)
1) Create a directory in the root of your fixed disk to place the
drivers; for example, C:\ND5300. Then, copy all files from the
directory \LANSRV.DOS of the Distribution Diskette to the directory.
2) Install DOS LAN Services.
3) When you are prompted to select the type of your network card, select
"Network card not shown in list below", and then press <Enter>.
4) Enter the path where the OEMSETUP.INF file is located when prompted
for. (Type the directory created in step 1.)
5) When "ND5300 Plug and Play Ethernet Adapter" is displayed, press
<Enter> to continue.
6) Check if the settings are correct, and follow the instructions on
the screen to complete the installation.
NDC ND5300 Plug and Play Ethernet Adapter
NDIS Driver for IBM OS/2 LAN Server 4.0 Server Installation
==============================================================
Location of Driver: \LANSRV.OS2\ND5300.OS2 (for OS/2 LAN Server)
1) In OS/2 window, Click the "MPTS" icon.
2) The screen will display the IBM Logo, press "OK".
3) Select "Install" button.
4) Insert the "NDC ND5300 driver diskette", specify the driver
path A:\LANSRV.OS2 and press <Enter>.
5) When complete above step to load ND5300.OS2 into OS/2 system,
then configure your system.
6) The same step as step 3, select "Configure" button.
7) The screen will display "Configure" dialog box and select "LAN
adapters and protocols" then press "configure" button.
8) The screen will display "LAPS Configuration" dialog box, move
highlight to "ND5300 Plug and Play Ethernet Adapter" item in
"Network Adapter" window, and select "NetBios" protocol.
Press "OK".
9) Installation is complete now. Reset your PC by turning it off
and on.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.