1. nd4300.exe Driver
2. README.TXT File Contents

README.TXT Driver File Contents (nd4300.exe)

Windows NT 3.1, 3.5, 3.51
-------------------------
Note:
-----

(1) The directory structure provided on the NDIS 3.0 driver diskette has been
    setup for automatic OEM installation. Also, more information can be found
    in the Microsoft Windows NT User's Guide.

(2) Only x86-based Windows NT platforms are supported.


Follow the steps listed below:

   1    Insert the NDIS 3.0 driver diskette into the floppy drive.

   2    From Control Panel in the Windows NT Main window, double click
        on the Network icon.

   3    In the Network Settings dialog box, click "Add Adapter."

   4    In the Add Network Adapter dialog box, pull down the adapter card list
        menu and select "<Other> Requires disk from manufacturer" from the list.
        Then click "Continue."

   5    In the next window, enter:

              A:\WINNT\NT31  or  A:\WINNT\NT35(For NT 3.5, 3.51)

   6    Then, select "ND4300 PCI Ethernet Adapter" from the dialog box to
        install the ND4300 PCI Ethernet Adapter.

   7    Reboot your system to complete the driver installation process.



Installing Multiple LAN Adapters
---------------------------------

        Enter Windows NT and follow above setup procedure step 2,in the
        "Network Settings" dialog box, choose the "Configure.." button.
        The "Input Ethernet ID"  dialog box appears and input adapter's
        Ethernet ID for each adapter. Last step to select OK and close
        NETWORK SETUP. select SKIP if only one adapter is installed on
        this computer.

  Note: The "Ethernet ID" must match the adapter's MAC ID. Please
        use the NDCDIAG.EXE to view adapter's MAC ID.

Windows NT 4.0
---------------


   1. Insert the ND4300 PCI adapter into an empty PCI slot and boot up
      Windows NT 4.0.

   2. In Control Panel, double click the Network icon.

   3. Click the "Adapters" tab in network properties and then click the
      "Add" button.

   4. Click the "Have disk" button.

   5. Insert the ND4300 diskette into a floppy drive, type the complete path
      to where the ND4300 driver is located:

      e.g. :  a:\winnt\nt40,

   6. Click "OK."  The screen will show "ND4300 PCI Ethernet Adapter."

   7. Click "OK" and click "close."

   8. Reboot your computer to allow the settings to take effect.


Installing Multiple LAN Adapters
---------------------------------

        Enter Windows NT and follow above setup procedure step 3,in the
        "Network Settings" dialog box, choose the "Properties" button.
        The "Input Ethernet ID"  dialog box appears and input adapter's
        Ethernet ID for each adapter. Last step to select OK and close
        NETWORK SETUP. select SKIP if only one adapter is installed on
        this computer.

  Note: The "Ethernet ID" must match the adapter's MAC ID. Please
        use the NDCDIAG.EXE to view adapter's MAC ID.


For additional information refer to your Microsoft Windows NT OS
documentation.


-------------------------------------[END]--------------------------------------