NDC SOHOware PCMCIA/ND51XX Adapter
NDIS Driver for IBM PC LAN Program Workstation Installation
===========================================================
PRE-INSTALLATION
Before installing the NOS or network applications, you should first
run NDCONF1 to configure and diagnose the SOHOware PCMCIA adapter(s).
We recommend you to select "Update CONFIG.SYS" in the "Configuration
Menu" before exiting NDCONF1.
INSTALLATION PROCEDURE
1) At the DOS prompt, insert the IBM LAN Support Program (LSP)
Version 1.30 (or later) diskette.
2) Type: DXMAID
3) Press the Enter key three times.
The Environment Information screen appears.
4) Specify the following values for the fields on this screen:
Configuration for this computer? Yes
Use existing configuration information? No
Do you have adapter option diskettes? Yes
Are you configuring for two adapters? No
Source for LSP A:\
Target for new configuration C:\lsp
5) Press Enter to store your choices.
The program prompts you to install the option diskette.
6) Insert the NDC Setup Diskette in your source drive and specify
the path: A:\NDIS.
7) Press Enter.
The necessary files are copied from the "SOHOware PCMCIA/
ND51XX Driver Set" diskette to your target directory on your
computer's hard disk.
8) Press Enter three times.
9) Insert the LSP diskette and press Enter.
The Current Configuration screen appears with the NE2000
Ethernet adapter and protocols already selected.
10) Press F4. LSP is installed.
11) Use any text editor to edit the CONFIG.SYS file. Specify at
least 20 files in the FILES= line; for example:
files=20
Edit PROTOCOL.INI in C:\LSP to set the values of "INTERRUPT"
and "IOBASE" in [NE2000_NIF] to match what you specified by
NDCONF1.
Once you save your CONFIG.SYS and PROTOCOL.INI files, reset
your computer.
12) Insert the PC LAN Install Diskette.
13) Type: INSTALL
14) Press Enter.
15) Press Enter three more times.
16) Select the level of function for this workstation, either
"Basic Services" or "Extended Services". Most of the time,
select the second option.
17) Specify "Workstation".
18) Specify either "Send messages" or "Send, receive, and log
messages" options. Most of the time, select the second option.
19) Specify the target path for the PC LAN files. The default
pathname is C:\DOS.
20) Specify the machine's ID and the domain ID. The domain ID must
be the domain server ID and must be the same for all
workstations on the network.
21) Follow the prompts to complete the installation until you
reach the, Change System Configuration File screen. Usually,
you should accept the default for the system configuration
file.
The Change System Batch File screen appears. Usually you
should accept the default.
NDC SOHOware PCMCIA/ND51XX Adapter
NDIS Driver for IBM PC LAN Program Server Installation
======================================================
PRE-INSTALLATION
Before installing the NOS or network applications, you should first
run NDCONF1 to configure and diagnose the SOHOware PCMCIA adapter(s).
We recommend you to select "Update CONFIG.SYS" in the "Configuration
Menu" before exiting NDCONF1.
INSTALLATION PROCEDURE
1) At the DOS prompt, insert the IBM LAN Support Program (LSP)
Version 1.30 (or later) diskette.
2) Type: DXMAID
3) Press the Enter key three times.
The Environment Information screen appears.
4) Specify the following values for the fields on this screen:
Configuration for this computer? Yes
Use existing configuration information? No
Do you have adapter option diskettes? Yes
Are you configuring for two adapters? No
Source for LSP A:\
Target for new configuration C:\lsp
5) Press Enter to store your choices.
The program prompts you to install the option diskette.
6) Insert the NDC Setup diskette in your source drive and specify
the path: A:\NDIS.
7) Press Enter.
The necessary files are copied from the NDC Setup
diskette to your target directory on your computer's hard
disk.
8) Press Enter three times.
9) Insert the LSP diskette and press Enter.
The Current Configuration screen appears with the NE2000
Ethernet adapter and protocols already selected.
10) Press F4. LSP is installed.
11) Use any text editor to edit the CONFIG.SYS file. Specify at
least 20 files in the FILES= line; for example:
files=20
Edit PROTOCOL.INI in C:\LSP to set the values of "INTERRUPT"
and "IOBASE" in [NE2000_NIF] to match what you specified by
NDCONF1.
Once you save your CONFIG.SYS and PROTOCOL.INI files, reset
your computer.
12) Insert the PC LAN Install Diskette in your computer's diskette
drive.
13) Type: INSTALL
14) Press Enter.
15) Press Enter three more times.
16) Select the level of function for this workstation, either
"Basic Services" or "Extended Services". Most of the time,
select the second option.
17) Specify "Server".
18) Specify either "Send messages" or "Send, receive, and log
messages" options. Most of the time, select the second option.
19) Specify the target path for the PC LAN files. The default
pathname is C:\DOS.
20) Specify the machine's ID and the domain ID. The domain ID must
be the domain server ID and must be the same for all
workstations on the network.
21) Follow the prompts to complete the installation until you
reach the Change System Configuration File screen. Usually,
you should accept the default for the system configuration
file.
The Change System Batch File screen appears. Usually you
should accept the default.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.