NDC SOHOware PCMCIA/ND51XX Adapter
Packet Driver for NCSA PC/TCP Installation
=================================================
PRE-INSTALLATION
Before installing the NOS or network applications, first run NDCONF1
to configure and diagnose the SOHOware PCMCIA adapter(s). We recommend
you to select "Update CONFIG.SYS" in the "Configuration
Menu" before exiting NDCONF1.
INSTALLATION PROCEDURE
1) Make sure you have the correct version of NCSA Telnet for the
PC. You need version 2.3 or later to support the packet
driver interface.
2) Install the NCSA software onto your system. Please refer to
the NCSA documentation for detailed instructions.
3) Load the NE2000 Packet Driver "NE2000PK.COM" in the \PACKET
directory of "SOHOware PCMCIA/ND51XX Driver Set" diskette:
NE2000 Packet Driver Basic Syntax:
NE2000PK <PD_INT_NO> [IRQ] [IO_BASE]
where:
<PD_INT_NO> This specifies the software interrupt (IRQ)
where you'll load the packet driver. It must
be in the range 0x60 to 0x80.
The PC/TCP kernel, by default, is loaded at
interrupt 0x61 (so don't load the packet
driver there!)
[IRQ] This specifies the hardware interrupt (IRQ) of
your card.
[IO_BASE] This specifies the I/O address of your card.
Following is an example to load the NE2000 packet driver using
software interrupt vector 0x60 for NE2000 compatible adapter
with IRQ=3, IO_BASE=0x300.
NE2000PK 0x60 3 0x300
4) At this point you are ready to run NCSA applications (e.g.,
'ftp', 'telnet', etc.).
For information regarding NCSA's products please contact:
National Center for Supercomputing Applications
264 Computing Applications Building
605 E. Springfield Ave.
Champaign, Ill. 61820
(217) 244-0638
telbug@ncsa.uiuc.edu
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.