1. nd51xxe1.exe Driver
2. BANYAN.TXT File Contents

BANYAN.TXT Driver File Contents (nd51xxe1.exe)

NDC SOHOware PCMCIA/ND51XX Adapter
Banyan VINES Client Installation
=================================================

PRE-INSTALLATION

     Before installing the NOS or network applications, you should first
     run NDCONF1 to configure and diagnose the SOHOware PCMCIA adapter(s).
     We recommend you to select "Update CONFIG.SYS" in the "Configuration
     Menu" before exiting NDCONF1.

INSTALLATION PROCEDURE

1)   On your hard disk, make a directory called BANYAN (C:\BANYAN)

2)   Insert the "VINES (R) LAN S/W (DOS) INSTALL" diskette into
     drive A: and copy all files to your BANYAN directory:

          COPY A:\*.* C:\BANYAN

3)   Locate the "VINES(R) LAN S/W (DOS)". Copy the "NEBAN.EXE"
     file from the Novell directory (on a:) to your BANYAN directory:

          COPY A:\NOVELL\NEBAN.EXE C:\BANYAN

4)   Form the BANYAN directory on your hard disk, run the PCCONFIG
     program (a VINES utility). Type:

          PCCONFIG

5)   From the "Configuring a PC for the Network" menu, select:

          "1-Network Card Settings"

     From the selection of network cards, choose:

          "Novell NE1000/NE2000"

     Select the appropriate values of "I/O Address (300, 320, 340,
     360) " and "Interrupt Level (2-5)" to match what you set in
     NDCONF1.

6)   Save your changes by hitting the (F10) key.

7)   Return to the main menu of PCCONFIG.  This time, select:

          "2-Login Environment Settings"

     From the next menu, select:

          "Novell NE1000/NE2000"

8)   Save your changes by hitting the (F10) key.

          This completes the installation of BANYAN VINES (DOS)
          Client.

NDC SOHOware PCMCIA/ND51XX Adapter
NDIS Driver for Banyan VINES Client Installation
=================================================

PRE-INSTALLATION

     Before installing the NOS or network applications, you should first
     run NDCONF1 to configure and diagnose the SOHOware PCMCIA adapter(s).
     We recommend you to select "Update CONFIG.SYS" in the "Configuration
     Menu" before exiting NDCONF1.


INSTALLATION PROCEDURE


1)   On your hard disk, make a directory called BANYAN (C:\BANYAN)

2)   Insert the "VINES (R) LAN S/W (DOS) INSTALL" diskette in
     drive A: and copy all files to your BANYAN directory:

          COPY A:\*.* C:\BANYAN

3)   From the BANYAN directory on your hard disk, run the PCCONFIG
     program (a VINES utility). Type:

          PCCONFIG

4)   From the "Configuring a PC for the Network" menu, select:

          "1-Network Card Settings"

     From the selection of network cards, choose:

          "NDIS Ethernet"

     Key in specified interrupt number, and "NE2000_NIF" to the
     "PROTOCOL bindings =".

5)   Save your changes by enter the (F10) key.

6)   Return to the main menu of PCCONFIG.  This time, select:

          "2-Login Environment Settings"

     From the next menu, select:

          "NDIS Ethernet"

7)   Save your changes by hitting (F10).

8)   Modify the CONFIG.SYS and PROTOCOL.INI files, see the example.

     Sample configuration files:

     CONFIG.SYS

               :
          DEVICE=C:\BANYAN\PROTMAN.DOS  /I:C:\BANYAN
          DEVICE=C:\BANYAN\NE2000.DOS
               :

     PROTOCOL.INI

          [PROTOCOL MANAGER]
               DRIVERNAME = PROTMAN$

          [VINES_XIF]
               DRIVERNAME = NDISBAN$
               BINDINGS = "NE2000_NIF"

          [NE2000_NIF]
               DRIVERNAME = MS2000$
               IOBASE = 0x300
               INTERRUPT = 3

     where the values of "IOBASE" and "INTERRUPT" must match the settings
     you specified in NDCONF1.

9)   Copy the NE2000 DOS NDIS driver to your Banyan directory

          COPY A:\NDIS\NE2000.DOS C:\BANYAN

     This completes the installation of BANYAN VINES (DOS) Client.