SFA110A DRIVER INSTALLATION GUIDE for WINDOWS 95A, 95-OSR2
==============================================================
1. Plug SOHOware 10/100 Fast Ethernet PCI adapter
into one of the Master PCI slots on your motherboard.
2. Turn power on then boot from Windows 95A (or Windows
95-OSR2).
3. [Win95A]
Window system will prompt PCI Ethernet Controller found in
"New Hardware Found" dialog box.
[Win95-OSR2]
Window system will prompt PCI Ethernet Controller found in
"Update Device Driver Wizard" dialog box.
4. [Win95A]
(a)Select "Driver from disk provided by hardware manufacturer"
from "New Hardware Found" dialog box, then click the "OK" button.
The "Install From Disk" dialog box will open.
(b)Insert the SOHOware Driver Diskette into your floppy drive.
(c)Enter the driver pathname (i.e. "A:\"), then click the "OK"
button from "Install from Disk" dialog box.
[Win95-OSR2]
(a)Windows will detect the SOHOware 10/100 F/E PCI Adapter and the
"Update Device Driver Wizard" dialog box will open. Click "Finish".
(If you did not insert the floppy disk at this time, Windows
will fail to find the driver. You can insert the floppy disk
and specify the "Other location". Go to step #c.)
(b)If it's the 1st time you install an Ethernet Adapter:
1. The "Network" window will show, click "OK".
2. Type the Computer name and Workgroup name for your PC.
3. Tab "Configuration" to add the needed network components.
Then click "Close".
(c)Select the "Other Locations..." button, insert the SOHOware Driver
Diskette into your floppy drive, and then enter the driver pathname
(i.e.: "A:\"), then click the "OK" button.
(d)The Windows 95-OSR2 will indicate that Windows 95 found the
"SOHOware 10/100 PCI Network Adapter" driver on the floppy diskette
(A:\). Click the "Finish" button.
5. Follow screen instructions to complete the process. Here
Windows may ask you to enter the driver path name again
(i.e. " A:\"), and also ask you to insert the Windows 95
Source CD-ROM into CD drive. Type in the location of your
Windows Source files (your CD-ROM drive letter - i.e.: "D:\Win95")
and then click the "OK" button.
6. Windows will ask you to restart your computer. Remove the
floppy disk from the floppy drive and click the "Yes" button to
complete the installation.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.