NetWare 32-bit ODI Driver Installation
=======================================
NetWare DOS ODI Server Driver Installation (NetWare 3.11)
=========================================================
Requirements:
-------------
SOHOware Driver Diskette (FE100A.LAN)
Installation Procedure:
-----------------------
Before you start with the installation process, make sure that
the Novell NetWare 386 v3.11 server is properly installed.
Similarly, your adapter should also be properly installed
in your workstation.
1. Insert the SOHOware Driver Diskette into drive A
and check the contents of subdirectory \netware\server.31X
It should contain the following file:
FE100A.LAN Ä Novell NetWare V4.X, 3.1X Server Driver for 10/100
PCI Fast Ethernet Adapter.
AUTOEXEC.NCF
ETHERTSM.NLM
LSLENH.NLM
MONITOR.NLM
MSM31X.NLM
PATCHMAN.NLM
2. Copy the above LAN files from the SOHOware Driver Diskette
into the NetWare 386 subdirectory of your server.
3. Run SERVER.EXE from your server. You will see a series
of NetWare messages onscreen.
4. Before load server driver you must load above those extension name
named NLM driver. You can reference the autoexec.ncf file in
\netware\server.31X directory.
5. When the NetWare 386 prompt appears (indicated by a colon),
load your server driver. Simply type:
: LOAD [c:]FE100A FRAME=ETHERNET_802.3 <Enter>
(Command Syntax : LOAD [c:]<Driver Name> FRAME=<FRAME TYPE>)
6. Bind IPX to the SOHOware LAN driver. At the NetWare server
prompt, type:
:BIND IPX FE100A <Enter>
7. After pressing <Enter> the computer prompts you for
the Network Number. For details on how to assign this
number, please consult your NetWare 386 Installation
Manual.
NetWare DOS ODI Server Driver Installation (NetWare 3.12)
=========================================================
Requirements:
-------------
SOHOware Driver Diskette (FE100A.LAN)
Installation Procedure:
-----------------------
Before you start with the installation process, make sure that
the Novell NetWare 386 v3.12 server is properly installed.
Similarly, your adapter should also be properly installed
in your workstation.
1. Insert the SOHOware Driver Diskette into drive A
and check the contents of subdirectory \netware\server.31X
It should contain the following file :
FE100A.LAN Ä Novell NetWare V4.X, 3.1X Server Driver for
SOHOware 10/100 PCI Network Adapter.
ETHERTSM.NLM
MSM31X.NLM
2. copy the above files into the NetWare 386 subdirectory of your server.
3. Run SERVER.EXE from your server. You will see a series
of NetWare messages onscreen.
4. Before load server driver you must load above those extension name
named NLM driver. You must load msm31x.nlm firstly. Then load
ethertsm.nlm.
5. When the NetWare 386 prompt appears (indicated by a colon),
load your server driver. Simply type:
: LOAD [c:]FE100A FRAME=ETHERNET_802.3 <Enter>
(Command Syntax : LOAD [c:]<Driver Name> FRAME=<FRAME TYPE>)
6. Bind IPX to the SOHOware LAN driver. At the NetWare server
prompt, type:
:BIND IPX FE100A <Enter>
7. After pressing <Enter> the computer prompts you for
the Network Number. For details on how to assign this
number, please consult your NetWare 386 Installation
Manual.
Installation notes:
-------------------
1. If you are doing the PERFORM3 or ENDURNCE test, you'd better add the
followings in your AUTOEXEC.NCF of the server,
Set Immediate Purge Of Deleted Files=ON
2. You had better add the followings in the STARTUP.NCF:
Set Reserved buffers below 16 meg=200
Set maximum Physical receive Packet Size=1520
3. If you want to use monitor.nlm, you'd better use the one located on the diskette.
---
All trademarks and brand names mentioned belong to their
respective owners.
-- THE END --
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.