NOTICE!!! 1. If you have set your SFA110A under fixed badwidth and duplex mode, Once you rerun SFADiag.exe, all setting you've done will be reset. 2. When you finish the setting that fixes bandwidth and duplex mode, you must back monitor to "Main Functions", and then enter "Card Configuration" again, the correct bandwidth and duplex mode you've done will be displayed normally. 3. On Card Diagnosis-->Card Initialization and test-->Internal loopback, There are two items--No_Carrier & Loss_Of_Carrier, only can run well under 100MB & Full duplex. 4. For External loopback test, Only loopback connector could be used. 5. Due to difference between MS-DOS Eng. and MS-DOS Jap., you have to bypass config.sys & autoexec.bat under MS-DOS Jap. mode.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.