The files included are for use with the CCL series printers CCL600, CCL600 XF, CCL660 ES and CCL1200 ES. HEADER.HP2 - Standard HPGL2 header file which simply switches the CCL printer to HPGL2 mode. This is not required for the ES series. ASIZE.HP2 - This includes control codes to specify that the printer use letter (8.5 x 11) paper. BSIZE.HP2 - This includes control codes to specify that the printer use tabloid (11 x 17) paper. NOTE: The above files do not work when the printer is set to HP/GL2 mode, only when SYS = AUTO. The control codes are PCL5 commands. HPGL2 does not have any commands for cut-sheet paper sizes. TRAILER.HP2 - It is necessary to send this file at the end of each document to cause the printer to print the document reliably. To use these files on a direct printer connection, from the DOS prompt type (for example): COPY HEADER.HP2+<filename>+TRAILER.HP2 LPT1 This will concatenate the three files together and copy them out the port LPT1. For more information on this and printing ASCII text on the CCL600 and CCL600 XF get the following documents from CalComp FAXBACK, automated faxing system: 3660 CCL600 OPERATOR NOTES 3667 PRINTING ASCII ON THE CCL600 FAXBACK is (714) 821-2914.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.