TechJET Color Firmware ( Firmware version 1.60 ) For models 5324 and 5336, installation will require that the right hand cover be removed to install a jumper on the parser board at W3 BTWREN. Do not attempt to upgrade the firmware without first verifying the W3 jumper is installed. Refer to README.TXT for details. Models 5324GT, 5336GT and 5336GT/PS are shipped with the jumper in place. ********************************************************************** * If the upgrade is performed without the W3 jumper in place the * * plotter will fail at startup and be unusable. Step-by-step * * instuctions complete with illustrations are available on FaxBACK * * Document number 4020. FaxBACK phone number 714-821-2914 * ********************************************************************** To put the plotter in the download mode power the plotter OFF. Press and hold the + and - keys while turning the power ON. Hold the keys until the plotter initializes The plotter should display "Awaiting download file" Press CTRL C to abort the download orDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.