The following changes and enhancements has been made to the DECODE Program Change to V2.01 16/ 2/89 Changed to display Plot-Data if there is some in the 1.st Record Change to V2.02 16/ 4/89 Change to allow Buffer-Size selection off 2048 Byte on Commandline to allow Buffer overflow to occur. Change to V3.00 19/ 7/89 Change entry screen and configuration setup to a menu Change buffer pointer to max after receiving hex 0F E O P- Record-Command Change to V3.01 22/ 7/89 Include sequential overlay Fix Rasfil count Error by count <= 0 Change to V3.02 01/08/89 Fix Problem by Rotate 2.nd Byte check for less then 15 Change usrsym definition from >60 to >63 and definition must end in the current buffer Change to V3.03 08/08/89 Change fopen mode from (r) to (rb) for files with CR as EOMDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.