README.TXT Driver File Contents (EN-2000PXV44.zip)

   LAN Server 4.0

   Introduction:
   -------------
   This document describes the  procedure to install  NDIS driver on DOS
   LAN Requester and OS/2 LAN server 4.0 for ISA Plug&Play ethernet card.

   Location of Driver: \NDIS\PNPND.DOS (for DOS LAN Services)
                       \NDIS\PNPND.OS2 (for OS/2 LAN Server)


   Installing driver procedure on DOS LAN Requester :
   --------------------------------------------------
      Before you start with the installation  process,  make sure that
      DOS LAN Services is properly installed.  Similarly, your adapter
      should also be properly installed in your client PC.

      1. Copy  PNPND.DOS from  your  Driver  diskette
         (A:\LANSRV\DOS\LAN_4) to DOS LAN Services subdirectory C:\DLS.

      2. Under DOS LAN Requester subdirectory C:\DLS, run INSTALL

      3. The  screen  display  some description. If it's correct, move
         highlight to "The listed options are correct" item ,then press
         ENTER.

      4. Move highlight to "Network Card", then press ENTER.

      5. Select "Change driver for network card." item, then press ENTER.

      6. Select "Network card not shown in list below..", then press ENTER.

      7. Insert the ethernet adapter driver diskette in floppy A,and specify
         the pathname A:\LANSRV\DOS\LAN_S4,then press ENTER.

      8. ethernet adapter driver is now installed on your computer, reboot
         your computer.

      NOTES:
      ------
          Parameters for the PROTOCOL.INI file:

           AdapterID : This keyword is provided by PNPND, and is required
                       when more than one ethernet adapters exist on one
                       system.


   Installing driver procedure on OS/2 LAN Server 4.0:
   ---------------------------------------------------
      Before you start with the installation  process,  make sure that
      OS/2 LAN Server  is properly installed.  Similarly, your adapter
      should also be properly installed in your server.

      1. In OS/2 window, Click the "MPTS" icon.

      2. The screen will display the IBM Log, press "OK".

      3. Select "Install" button.

      4. Insert the ethernet driver diskette, specify the driver
         path A:\LANSRV\OS2 and press <Enter>.

      5. When  complete  above step to load  PNPND.OS2 into  OS/2
         system, then configure your system.

      6. The same step as step 3, select "Configure" button.

      7. The screen will display "Configure" dialog box and select "LAN
         adapters and protocols" then press "configure" button.

      8. The screen will display "LAPS Configuration" dialog box, move
         highlight to "ISA Plug and Play" item in "Network Adapter"
         window, and select "NetBios" protocol. Press "OK".

      9. Installation is complete now. Reset your PC by turning it off
         and on.

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.33