Driver Compatibility
Our Plug&Play ethernet adapter supports AUTO, jumperless/PnP and
jumper modes. You can set the adapter's mode to jumper mode or to
AUTO/jumperless/PnP mode by the jumper on the card. The default mode
is AUTO mode for ver 3.x or PnP mode for ver 2.x. You can set
the adapter's mode to AUTO, jumperless or PnP by running setup.exe
program provided in this driver diskette.
For ver 3.x adapters, it is recommended to use AUTO mode always. The
adapter will set to the appropriate mode according to your sytem,
regardless the system is PnP or non-PnP system.
For ver 2.x adapters, it is recommended to use PnP mode if your PC
supports PnP feature, or it is recommended to use jumperless mode
if the PC does not support PnP feature.
Our Plug&Play ethernet adapter supports turbo function to speed up
packet receiving and transmission. We provide some popular drivers
with turbo feature in this driver diskette. Our drivers improve
the performance of the network adapter about 30%. It is strongly
recommended to use the driver in this diskette for our Plug&Play
adapters instead of any other NE2000 compatible drivers.
Our Plug&Play ethernet adapters are software compatible to NE2000+,
NE2000 and NE1000. If you need a driver we do not support by now,
you can use any compatible drivers in your hand. You must set the
operating mode of PnP ethernet to jumper or jumperless mode and
setup the ethernet's configuration first, and then follow the setup
procedure of your driver to install your driver to your target system.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.