README.TXT Driver File Contents (EN-5200PxAV35.zip)

   Windows for Workgroups v3.11

   Introduction:
   -------------
   This document describes the procedure to install  Microsoft Windows
   for Workgroups v3.11 driver for PCI Ethernet adapter.

   LOCATION OF DRIVER:     \WFW311\PCIND.386


   Setup Procedure:
   ----------------
      After you run into Windows for Workgroup 3.11:

      1. Select the "Network Setup" icon in the Network Group.

      2. Click on the "Drivers..." button.

      3. If you are replacing a previous LAN adapter, select the Remove
         button to delete that adapter

      4. Click on the "Add Adapter" button.

      5. Choose Unlisted or Updated Network Adapter.

      6. Insert the adapter driver disk in drive "A" and specify the path
         A:\WFW311 for the location of the driver.

      7. Close, and when prompted, restart your computer so that changes
         take affect.


   NOTES:
   ------
      1. Parameters for the PROTOCOL.INI file:

         AdapterID : This keyword is provided  by RTL8029, and is required
                     when more than one PCI Ethernet Adapters exist on one
                     system.

      2. Installing Multiple LAN Adapters:
         There are two different method to complete it:
         (a) Under  DOS  mode, you can modify the AdapterID in file
             C:\WFW311\PROTOCOL.INI by yourself.
         (b) Or you can enter Windows for WorkGroup and follow  above
             setup procedure step 2,then click on "Setup.." button, select
             "Advanced...",fill AdapterID in Value item. Make changes and
             select OK then close NETWORK SETUP.


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 0.73