MDI Device Driver for National DP83820, Gigabit NIC on SCO UnixWare 7.1.0 ========================================================================= Overview: ========= This file explains how to install and configure the MDI driver. Installation and Configuration ============================== Manual Installation of the driver --------------------------------- a) Transfer dp.pkg onto a floppy disk b) Poweroff your system and install the card in a PCI Bus Mastering slot. c) Power on the system. d) Mount floppy drive # mount -F dosfs /dev/fd0 /mnt e) Copy DSP (Driver Software Package) files to /home/nsc/dp # mkdir -p /home/nsc/dp # cd /home/nsc/dp # cp /mnt/dp.pkg . f) Unmount floppy # umount /mnt h) To install, use command pkgadd and follow instructions # pkgadd -d /home/nsc/dp/dp.pkg Configuring the Driver : ----------------------- a) After installation of the driver, run "netcfg" and add the desired Menu options. Select, Hardware -> Add new LAN Adapter -> National Semiconductor's Gigabit Ethernet Adapter DP83820 b) Choose the appropriate protocol (SCO TCP/IP) . c) Fill in TCP/IP Configuration parameters like IP Address, NetMask, Domain Name etc.. d) System reboot is not required.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.