Server Driver for NetWare 5.X
Introduction:
-------------
This document describes the procedure to install the NetWare v5.X
server driver for National Semiconductor DP83820 Gigabit Network
Adapter.
Installaton Procedure :
---------------------
Before you start with the installation process, make sure that
the Novell NetWare v5.X server is properly installed.
Similarly, your adapter should also be properly installed in your
server.
1. Insert the Realtek Driver Diskette into drive A and check the
contents of subdirectory \NETWARE\412_5X, It should contain the
following file :
DP83820.LANÄ Novell NetWare V5.X Server Driver
DP83820.LDIÄ Novell NetWare V5.X Server Driver Installation
Information File
2. At the NetWare prompt (indicated by the Server name), run the
NWCONFIG.NLM program by typing:
server name: LOAD NWCONFIG <Enter>
3. Select " Driver options " and press <Enter>.
4. Select " Configure network drivers " and press <Enter>.
5. Select " Select an addtional driers " and press <Enter>.
6. Press the <Ins> key to specify other drivers to install.
7. Press <F3> and specify the driver path (A:\NETWARE\412_5X)
and press <Enter>.
8. The DP83820.LAN driver should appear in your choice list for the
'Select a Driver to install' field. Choose this driver and press
<Enter>.
9. Press <Yes> to copy DP83820.LAN and DP83820.LDI to the Server v5.X
SYSTEM directory. And then it will start driver loading and
binding procedure. This will allow you to load and bind all 4
frame types supported by NetWare.
10. Add the LOAD and BIND statements you require to the server's
AUTOEXEC.NCF file so that the LAN driver will load automatically
each time the server starts up.
Installation Notes:
-------------------
1.Installing Multiple LAN Adapters:
The keyword "SLOT" is provided for multiple LAN adapters in a
single server by the driver DP83820.LAN. So, add EtherID in LOAD
commands. For example:
LOAD DP83820 FRAME=Ethernet_802.2 NAME=LAN_A SLOT=1
BIND IPX TO LAN_A NET=11
LOAD DP83820 FRAME=Ethernet_802.2 NAME=LAN_B SLOT=2
BIND IPX TO LAN_B NET=22
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.