OEMSETUP.INF Driver File Contents (EW-7115UV21.zip)

;
;          Copyright (c) 2000 ATMEL
;          All Rights Reserved.
;
; 
; ATMEL FastVNET 11 Mbits Wireless LAN Card
;

[Identification]
    OptionType = NetAdapter

[PlatformsSupported]
    PCMCIA

[Options]
    FastVNET

[OptionsTextENG]
    FastVNET	   = "ATMEL 11Mbps Wireless LAN"

[FileConstants]
UtilityInf      = "UTILITY.INF"
ParamInf        = "NCPARAM.INF"
subroutineinf   = "SUBROUTN.INF"
SoftwareType    = "driver"
Exit_Code       = 0
NetEventDLL     = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL     = "%SystemRoot%\System32\IoLogMsg.dll"
Manufacturer    = "ATMEL"

ProductMajorVersion     = "4"
ProductMinorVersion     = "00"
ProductVersion  = $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductSoftwareName     = "FastVNET"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\fastvnet.sys"
NetRuleSoftwareType     = "FastVNETSys ndisDriver FastVNETDriver"
NetRuleSoftwareUse      = $(SoftwareType)
NetRuleSoftwareBindForm = """FastVNETSys"" yes no container"
NetRuleSoftwareClass    = {"FastVNETDriver basic"}
NetRuleSoftwareBindable = {"FastVNETDriver FastVNETAdapter non exclusive 100"} 
ProductHardwareName     = "FastVNET"
NetRuleHardwareType     = "FastVNET FastVNETAdapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass    = {"FastVNETAdapter basic"}
ProductKeyName  = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName    = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
DatabaseKeyName    = $(!NTN_ServiceBase)"\Pcmcia\DataBase"
 
[FileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"
FunctionTitle   = "ATMEL 11Mbps Wireless LAN Driver Setup"
ProductSoftwareDescription      = "ATMEL 11Mbps Wireless LAN"
ProductSoftwareTitle            = "ATMEL 11Mbps Wireless LAN"
ProductHardwareFastVNETDescription  = "ATMEL 11Mbps Wireless LAN"
ProductHardwareFastVNETTitle  = "ATMEL 11Mbps Wireless LAN"
ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."
IRQList  = ^(FastVNETIRQChoices, 1)
IRQValues = ^(FastVNETIRQChoices, 2)
IOBaseAddrList = ^(FastVNETIOBaseAddrChoices, 1)
IOBaseAddrValues = ^(FastVNETIOBaseAddrChoices, 2)
FastVNETIRQDefault = 3
FastVNETIOBaseAddrDefault = 3

[GeneralConstants]
from      = ""
to        = ""
ExitCodeOk     = 0
ExitCodeCancel = 1
ExitCodeFatal  = 2
KeyNull         = ""
MAXIMUM_ALLOWED   = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct      = ""
KeyParameters   = ""
TRUE            = 1
FALSE           = 0
NoTitle            = 0
ExitState   = "Active"
OldVersionExisted = $(FALSE)
DriverPath      = $(!STF_NTPATH)\drivers

[date]
    Now = {} ? $(!LIBHANDLE) GetSystemDate

[Identify]
    set !DebugOutputControl = 1
    read-syms Identification
    set Status     = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media      = #("Source Media Descriptions", 1, 1)
    Return $(Status) $(Identifier) $(Media)

[ReturnOptions]
    set !DebugOutputControl = 1
    set Status        = STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
        ifstr(i) $($1) == ""
           goto returnoptions
        endif
        set PlatformList = ^(PlatformsSupported, 1)
        Ifcontains(i) $($1) in $(PlatformList)
           goto returnoptions
        else
           set Status = STATUS_NOTSUPPORTED
           goto finish_ReturnOptions
        endif
    else
        set Status = STATUS_NOLANGUAGE
        goto finish_ReturnOptions
    endif
returnoptions = +
    set OptionList     = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status         = STATUS_SUCCESSFUL
finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)

[InstallOption]
;;  set !G:DebugOutputControl = 1
;    set !DebugOutputControl = 1
    set Option   = $($1)
    set SrcDir   = $($2)
    set AddCopy  = $($3)
    set DoCopy   = $($4)
    set DoConfig = $($5)
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) NOT-IN $(LanguageList)
        Return STATUS_NOLANGUAGE
    endif
    set-subst LF = "\n"
    read-syms GeneralConstants
    read-syms FileConstants
    read-syms DialogConstants$(!STF_LANGUAGE)
    ifstr(i) $(!NTN_Origination) == "NCPA"
        set Continue = $(OK)
    endif
    read-syms FileConstants$(!STF_LANGUAGE)
    detect date
    set-title  $(FunctionTitle)
    set to   = Begin
    set from = Begin
    set CommonStatus = STATUS_SUCCESSFUL
    EndWait


Begin = +
    Ifstr(i) $(!NTN_InstallMode) == deinstall
        set StartLabel = removeadapter
    else-Ifstr(i) $(!NTN_InstallMode) == Update
        set StartLabel = UpgradeSoftware
    else-Ifstr(i) $(!NTN_InstallMode) == bind
        set StartLabel = bindingadapter
    else-Ifstr(i) $(!NTN_InstallMode) == configure
        set StartLabel = configureadapter
        set CommonStatus = STATUS_REBOOT
                Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
                        Debug-Output "Cannot configure FastVNET Driver"
                        Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
                        ifint $($ShellCode) != $(!SHELL_CODE_OK)
                                Debug-Output "ShellCode error: cannot get an error string."
                                goto ShellCodeError
                        endif
                        set Error = $($R0)
                        set from = end
                        set to = end
                        goto nonfatalinfo
                endif
    else
                set StartLabel = installadapter
                set OEM_ABANDON_OPTIONS = {}
                set OEM_ABANDON_SOFTWARE = FALSE
                set OEM_ABANDON_ON = TRUE
    endif

    set from = $(fatal)
    set to = $(fatal)
    goto $(StartLabel)

installadapter = +
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
        CloseRegKey $(KeyProduct)
        ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
           Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
               $(ProductVersion)
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
               Debug-Output "ShellCode error: cannot get an error string."
               goto ShellCodeError
           endif
           goto end
        else
           Shell $(UtilityInf), CardExistedDlg
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
               Debug-Output "ShellCode error: cannot get an error string."
               goto ShellCodeError
           endif
           ifstr(i) $($R1) != "OK"
               set CommonStatus = STATUS_USERCANCEL
               goto end
           endif
           set OldVersionExisted = $(TRUE)
        endif
    endif
    Install "Install-Help"
    set IRQValue = *($(IRQList)  , $(FastVNETIRQDefault))
    set IOBaseAddrValue = *($(IOBaseAddrList) , $(FastVNETIOBaseAddrDefault))
    goto adapteroptions
configureadapter = +
    Ifstr $(KeyProduct) == $(KeyNull)
        OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
        Ifstr $(KeyProduct) == $(KeyNull)
            set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
            Debug-Output "Cannot find component product key"
            goto fatalregistry
        Endif
    Endif
    Debug-Output "INF: Shelling to FindService"
    Shell $(UtilityInf) FindService, $(KeyProduct)
    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "INF: FindService shell failure"
        Goto ShellCodeError
    Endif
    Ifstr(i) $($R0) != NO_ERROR
        Debug-Output "INF: FindService Shell error: "$($R0)
        Goto fatalregistry
    endif
    set KeyParameters = $($R2)
    CloseRegKey $($R1)
    Ifstr $(KeyParameters) == $(KeyNull)
        set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
        Debug-Output "Cannot find component service"
        goto fatalregistry
    endif
    set OldVersionExisted = $(TRUE)
    set ValueName = ""
    set ValueData = ""
    set ValueStr  = ""
    set ValueList = {}
    EnumRegValue $(KeyParameters) ValueList

    ForListDo $(ValueList)
        set ValueItem = $($)
        set ValueName = *($(ValueItem),1)
        set ValueData = *($(ValueItem),4)
        Ifstr(i) $(ValueName) == "InterruptNumber"
            set IRQValueIndex = $(ValueData)
        endif
        ifstr(i) $(ValueName) == "IoBaseAddress" ; IoBasePortAddress 
            set IOBaseAddrValueIndex = $(ValueData)
        endif
    EndForListDo

    set IRQValue = *($(IRQList), ~($(IRQValues),$(IRQValueIndex)))
    ifstr(i) $(IRQValue) == ""
	set IRQValue = *($(IRQList), 2)
    endif

    set IOBaseAddrValue = *($(IOBaseAddrList), ~($(IOBaseAddrValues),$(IOBaseAddrValueIndex)))
    ifstr(i) $(IOBaseAddrValue) == ""
	set IOBaseAddrValue = *($(IOBaseAddrList), 1) 
    endif

adapteroptions = +
    set from = adapteroptions
  sethelpfile "fastvnet.sys" 100 100 
   read-syms FileDependentDlg$(!STF_LANGUAGE)
    ui start "InputDlg"
    ifstr(i) $(DLGEVENT) == "CONTINUE"
                set IRQValueIndex = $(Combo1Out)
                set IOBaseAddrValueIndex = $(Combo2Out) ;set IOBaseAddrIndex = $(Combo2Out)
                ui pop 1
    else-ifstr(i) $(DLGEVENT) == "BACK"
                set CommonStatus = STATUS_USERCANCEL
                Debug-Output "Action: exit. Bye."
                ui pop 1
                goto end
    else
                ui pop 1
                Debug-Output "Action: unknown. Bye."
                goto end
    endif
adapterverify =+
        Goto skipoptions
skipoptions =+
    ifint $(OldVersionExisted) == $(TRUE)
        ifstr(i) $(!NTN_InstallMode) == configure
                goto writeparameters
        endif
    endif
    StartWait
    ifint $(OldVersionExisted) == $(FALSE)
        ifstr(i) $(!NTN_InstallMode) == "install"
                Ifstr(i) $(DoCopy) == "YES"
                    Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
                    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
                        Goto ShellCodeError
                    Else-Ifstr(i) $($R0) == STATUS_FAILED
                        Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
                        ifint $($ShellCode) != $(!SHELL_CODE_OK)
                           goto ShellCodeError
                        endif
                        set Error = $($R0)
                        Goto fatal
                    Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
                        Goto successful
                    Endif
                    Set SrcDir = $($R1)
                Endif
                install "Install-Option"
                ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
                    Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
                    ifint $($ShellCode) != $(!SHELL_CODE_OK)
                        goto ShellCodeError
                    endif
                    set Error = $($R0)
                    goto fatal
                endif
        endif

; add ATMEL\AT76C502 to PCMCIA Database
    OpenRegKey $(!REG_H_LOCAL) "" $(DatabaseKeyName) $(MAXIMUM_ALLOWED) KeyVendorID
    Ifstr $(KeyVendorID) == $(KeyNull)
    else
       OpenRegKey $(!REG_H_LOCAL) "" $(DatabaseKeyName)"\ATMEL" $(MAXIMUM_ALLOWED) KeyDeviceID
       Ifstr $(KeyDeviceID) == $(KeyNull)
	  CreateRegKey $(KeyVendorID) {"ATMEL",0,""} "" $(MAXIMUM_ALLOWED) "" KeyDeviceID
       endif
       CreateRegKey $(KeyDeviceID) {"AT76C502",0,""} "" $(MAXIMUM_ALLOWED) "" KeyAT76C502
       SetRegValue $(KeyAT76C502) {Driver,$(NoTitle),$(!REG_VT_SZ),fastvnet}
       SetRegValue $(KeyAT76C502) {DeviceType,$(NoTitle),$(!REG_VT_SZ),NET}
       CloseRegKey $(KeyVendorID)
       CloseRegKey $(KeyDeviceID)
       CloseRegKey $(KeyAT76C502)
    endif

       Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
                        $(ProductSoftwareName), +
                        $(ProductSoftwareName), +
                        $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
                        $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
                        $(NetEventDLL)
       Set OEM_ABANDON_SOFTWARE = TRUE
       ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "ShellCode error"
        goto ShellCodeError
       endif
       set RegistryErrorIndex = $($R0)
       set KeyProduct      = $($R1)
       Set SoftNetRulesKey = $($R2)
       CloseRegKey $($R3)
       CloseRegKey $($R4)
       CloseRegKey $($R5)
       Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
        EndWait
        Debug-Output "Registry error: add software components"
        CloseRegKey $(KeyProduct)
        CloseRegKey $(SoftNetRulesKey)
        goto fatalregistry
       endif
       set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
                   {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
                   {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
                   {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
                   {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
                   {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
                   {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
       Shell  $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
       ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "ShellCode error."
        goto ShellCodeError
       endif
       set RegistryErrorIndex = $($R0)
       Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
        EndWait
        Debug-Output "Registry error: add value list."
        CloseRegKey $(KeyProduct)
        CloseRegKey $(SoftNetRulesKey)
        goto fatalregistry
       endif
       set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
                        {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
                        {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
                        {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
                        {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
                        {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
       Shell  $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
       ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "ShellCode error."
        goto ShellCodeError
       endif
       set RegistryErrorIndex = $($R0)
       CloseRegKey $(KeyProduct)
       CloseRegKey $(SoftNetRulesKey)
       Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
        EndWait
        Debug-Output "Resgitry error: add value list."
        goto fatalregistry
       endif
    endif
    Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
    ifint $($R4) != -1
                Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
    endif
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "Cannot add hardware component"
                goto ShellCodeError
    endif
    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                EndWait
                Debug-Output "Registry error: add hardware component"
                CloseRegKey $($R1)
                CloseRegKey $($R2)
                CloseRegKey $($R3)
                goto fatalregistry
    endif
    set KeyParameters = $($R3)
    set KeyAdapterRules = $($R2)
    set AdapterNumber = $($R4)
    set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
                       {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
                       {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
                       {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
                       {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
                       {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
    Shell  $(UtilityInf), AddValueList, $($R1), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "ShellCode error"
                goto ShellCodeError
    endif
    CloseRegKey $($R1)
    set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
    set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
    set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
                        {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
                        {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
                        {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
    Shell  $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "ShellCode error."
                goto ShellCodeError
    endif
    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                EndWait
                Debug-Output "Resgitry error: add value list."
                CloseRegKey $(KeyParameters)
                CloseRegKey $(KeyAdapterRules)
                goto fatalregistry
    endif
    CloseRegKey $(KeyAdapterRules)
    goto writeparameters
writeparameters = +
    set IRQValue = *($(IRQValues), ~($(IRQList),$(IRQValueIndex)))
    set IOBaseAddrValue = *($(IOBaseAddrValues), ~($(IOBaseAddrList),$(IOBaseAddrValueIndex)))
    set NewValueList = {{InterruptNumber,	$(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+
                       	{BusType,		$(NoTitle),$(!REG_VT_DWORD),8},+
                       	{BusNumber,		$(NoTitle),$(!REG_VT_DWORD),0},+
			{Pcmcia,		$(NoTitle),$(!REG_VT_DWORD),1},+
                       	{IoBaseAddress,		$(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)},+
	               	{IoLength,		$(NoTitle),$(!REG_VT_DWORD),32},+
			{Channel,		$(NoTitle),$(!REG_VT_DWORD),3},+
			{Operating_Mode,	$(NoTitle),$(!REG_VT_DWORD),1},+
			{Frag_Threshold,	$(NoTitle),$(!REG_VT_DWORD),2346},+
			{RTS_Threshold,		$(NoTitle),$(!REG_VT_DWORD),2347},+
			{Rate,			$(NoTitle),$(!REG_VT_DWORD),3},+
			{WEP_KEY_INDEX,		$(NoTitle),$(!REG_VT_DWORD),0},+
			{WEP_KEY_1,		$(NoTitle),$(!REG_VT_SZ),"0000000000"},+
			{WEP_KEY_2,		$(NoTitle),$(!REG_VT_SZ),"0000000000"},+
			{WEP_KEY_3,		$(NoTitle),$(!REG_VT_SZ),"0000000000"},+
			{WEP_KEY_4,		$(NoTitle),$(!REG_VT_SZ),"0000000000"},+
			{WEP_Mode,		$(NoTitle),$(!REG_VT_DWORD),0},+
			{EncryptionLevel	$(NoTitle),$(!REG_VT_DWORD),0},+
			{AuthenticationType,	$(NoTitle),$(!REG_VT_DWORD),0},+
			{PreambleType,		$(NoTitle),$(!REG_VT_DWORD),0},+
			{PowerMgmtMode,		$(NoTitle),$(!REG_VT_DWORD),0},+
			{ESSID,			$(NoTitle),$(!REG_VT_SZ),""}}

    Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
    ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
        Shell $(UtilityInf),AddDefaultNetCardParameters,$(KeyParameters)
    endif
    CloseRegKey $(KeyParameters)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "ShellCode error."
                goto ShellCodeError
    endif
    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                Debug-Output "Registry error: Add value list"
                goto fatalregistry
    endif
    EndWait
    goto successful


bindingadapter =+
    set Error = "Binding: Sorry, not yet implemented."
    goto fatal
removeadapter = +
    Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
                Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
                                $(ProductSoftwareName)
                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                                Debug-Output "ShellCode error"
                                goto ShellCodeError
                endif
                set RegistryErrorIndex = $($R0)
                Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                                goto fatalregistry
                endif
    else
                Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
                        $(ProductSoftwareName), $(!NTN_RegBase)
                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                                Debug-Output "ShellCode error"
                                goto ShellCodeError
                endif
                set RegistryErrorIndex = $($R0)
                Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                                goto fatalregistry
                endif
    endif

; remove ATMEL\AT76C502 from PCMCIA Database
    OpenRegKey $(!REG_H_LOCAL) "" $(DatabaseKeyName) $(MAXIMUM_ALLOWED) KeyVendorID
    Ifstr $(KeyVendorID) == $(KeyNull)
    else
       OpenRegKey $(!REG_H_LOCAL) "" $(DatabaseKeyName)"\ATMEL" $(MAXIMUM_ALLOWED) KeyDeviceID
       Ifstr $(KeyDeviceID) != $(KeyNull)
          DeleteRegTree $(KeyDeviceID) "AT76C502"
          ; DeleteRegTree $(KeyVendorID) "ATMEL"
       endif
       CloseRegKey $(KeyVendorID)
    endif
    goto end

UpgradeSoftware = +
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
        install "Install-Update"
        ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
            goto fatal
        endif
        SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
        SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
        CloseRegKey $(KeyProduct)
    else
        goto fatalregistry
    endif
    goto end
successful = +
    goto end
abandon = +
    ForListDo $(OEM_ABANDON_OPTIONS)
        Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), $($)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error"
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    EndForListDo
    Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
        Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), FALSE
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error"
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    endif
    goto end
warning = +
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(to)
    else-ifstr(i) $($R1) == "CANCEL"
        goto $(from)
    else
        goto "end"
    endif
nonfatalinfo = +
    Set CommonStatus = STATUS_USERCANCEL
    Set Severity = STATUS
    goto nonfatalmsg
nonfatal = +
    Set Severity = NONFATAL
    goto nonfatalmsg
nonfatalmsg = +
    ifstr(i) $(Error) == ""
        Set Severity = NONFATAL
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(from)
    else
        goto "end"
    endif
fatalregistry = +
    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal
fataldetect = +
    Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "ShellCode error: cannot get an error string."
        goto ShellCodeError
    endif
    set Error = $($R0)
    Goto fatal
fatal = +
    ifstr(i) $(Error) == ""
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    goto setfailed
ShellCodeError = +
    set DlgType      = "MessageBox"
    set STF_MB_TITLE = $(ShellCodeErrorTitle)
    set STF_MB_TEXT  = $(ShellCodeErrorText)
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto setfailed
setfailed = +
    set CommonStatus = STATUS_FAILED
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
        set OEM_ABANDON_ON = FALSE
        goto abandon
    endif
    goto end
end = +
    goto term
term = +
    Return $(CommonStatus)

[Install-Option]
    set STF_VITAL = ""
    ifstr(i) $(AddCopy) == "YES"
        AddSectionFilesToCopyList Files-FastVNET $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
    endif
    ifstr(i) $(DoCopy) == "YES"
       set !STF_NCPA_FLUSH_COPYLIST = TRUE
       CopyFilesInCopyList
    endif
    ifstr(i) $(DoConfig) == "YES"
    endif
    Exit
[Install-Update]
   set STF_VITAL        = ""
   set STF_OVERWRITE    = "VERIFYSOURCEOLDER"
   AddSectionFilesToCopyList Files-FastVNET $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
   exit
[Install-Help]
   set STF_VITAL        = ""
   AddSectionFilesToCopyList Files-Help $(SrcDir) $(!STF_WINDOWSSYSPATH)
   set !STF_NCPA_FLUSH_COPYLIST = TRUE
   CopyFilesInCopyList
   exit

[Source Media Descriptions]
    1 = "Windows NT Workstation DRVLIB"
    2 = "Windows NT Workstation CD-ROM" 

[Signature]
    FileType = MICROSOFT_DRVLIB_FILE
[GetSignature]
    read-syms Signature
    return $(FileType)

[ProductType]
STF_PRODUCT  = Winnt
STF_PLATFORM = I386

[Files-Inf]
1,	oemsetup.inf,	 SIZE=1000,	RENAME=$(!UG_Filename)

[Files-Help]
;1,      FastVNET.HLP ,     SIZE=999

[Files-FastVNET]
2,      fastvnet.SYS ,     SIZE=999

[LanguagesSupported]
    ENG

[DialogConstantsENG]
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

[FileDependentDlgENG]
Label1 = "&IRQ Level:"
Label2 = "I/O &Port Address:"
DlgType = "RadioCombination"
DlgTemplate = "NE2000"
Caption = $(FunctionTitle)
Combo1List = $(IRQList)
Combo1Out  = $(IRQValue)
Combo2List = $(IOBaseAddrList)
Combo2Out  = $(IOBaseAddrValue)
ComboListItemsIn  = {Combo1List, Combo2List}
ComboListItemsOut = {Combo1Out, Combo2Out}
EditTextIn = ""
EditTextLim = ""
CBOptionsGreyed = {}
NotifyFields = {NO, NO}
HelpContext = 0

[FastVNETIRQChoices]
IRQ_1 = "3",3
IRQ_2 = "4",4
IRQ_3 = "5",5
IRQ_4 = "6",6
IRQ_5 = "7",7
IRQ_6 = "9",9
IRQ_7 = "10",10
IRQ_8 = "11",11
IRQ_9 = "12",12
IRQ_10 = "15",15

[FastVNETIOBaseAddrChoices]
IOBase_1  = "0x200",512
IOBase_2  = "0x220",544
IOBase_3  = "0x240",576
IOBase_4  = "0x260",608
IOBase_5  = "0x280",640
IOBase_6  = "0x2A0",672
IOBase_7  = "0x2C0",704
IOBase_8  = "0x2E0",736
IOBase_9  = "0x300",768
IOBase_10  = "0x320",800
IOBase_11  = "0x340",832
IOBase_12  = "0x360",864
IOBase_13  = "0x380",896
IOBase_14  = "0x3A0",928
IOBase_15  = "0x3C0",960
IOBase_16  = "0x3E0",992 
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 1.61