README.TXT Driver File Contents (16-503594.zip)

Installing Client 32 for Win95 and DOSWIN 


1.0   Overview
2.0   Installation Notes For  Client 32 for Windows 95 users
       2.1   Install PCMCIA 10/100M Fast Ethernet PC Card for
             the first time
       2.2   PCMCIA 10/100M Fast Ethernet PC Card Reinstallation

3.0   Installation Notes For Client 32 for DOSWIN users
       3.1  Windows 3.x Users
       3.2  DOS Users

4.0   Configuring LAN Adapter's Media Type and
      Installing Multiple LAN Adapters
      4.1 Configuring LAN Adapter's Media Type
      4.2 Installing Multiple LAN Adapters
      4.3 Sample Configuration Files
___________________________________________________________________



1.0 Overview
------------

      To install PCMCIA 10/100M Fast Ethernet Card in the Client 32
      for Windows 95 environment, you should have the Windows 95 CD-ROM
      And the NOVELL Client 32 CD-ROM nearby.

2.0  Installation Notes for Client 32 for Windows 95 users
----------------------------------------------------------

 2.1   Install PCMCIA 10/100M Fast Ethernet Card for the first time
 -----------------------------------------------------------------------
        1. Start the Windows 95 system.
           Note:
                Don't insert your PCMCIA 10/100M Fast Ethernet Card
                into a PC Card slot.

        2. If you have installed PCMCIA 10/100M Fast Ethernet Card
           NDIS3 driver. Do the following steps.

           2.1 Double click on "My Computer" icon under desktop.
           2.2 Double click on "Control Panel" icon under "My Computer"
               window.
           2.3 Double click on "Network" icon under "Control Panel"
               window.
           2.4 Select "PCMCIA 10/100M Fast Ethernet Adapter" item and
               click on [ Remove ] button. Click on [ OK ] button after
               the adapter have been removed under "Network" window.
           2.5 Click on [ No ] button under "System Settings Chagne"
               window.
           2.6 Please change the directory to C:\WINDOWS\INF
               2.6.1 Click on [ Start ] button.
               2.6.2 Select "Programs" -> "MS-DOS Prompt" item.
               2.6.3 Type the following command.
                     C:\WINDOWS>cd inf
                     C:\WINDOWS\INF>del AX88190.INF
                     C:\WINDOWS\INF>exit

        3. Run the Client 32 for Windows 95 installation program
           using SETUP.EXE and accept the agreement.

           Example:
             Click "Start" -> "Programs" -> "Windows Explorer"
              to find the Client 32 for Windows 95 SETUP.EXE.
              Double click SETUP icon in <PATH>\WIN95 directory.

        4. Check the box of "Upgrade NDIS drivers to ODI automatically,
           if available" and press [ Start> ] button.

        5. Click on [ Cancel ] button under "Select Device" window.

        6. Click on [ Cancel ] button under "Select Device" window.

        7. Click on [ Cancel ] button under "Select Device" window.

        8. Click on [ Yes ] button under "Recommended NetWare Client 32
           Properties" window.

        9. Specify NetWare Preferred server name and First network drive
           under "Novell NetWare Client 32 Properties" windos then click
           on [ Yes ] button.

       10. Click on [ OK ] button under "Installation Aborted" window.

       11. Click on [ OK ] button under "Network" window.

       12. Click on [ No ] button under "System Settings Change" window.

       13. Please insert your PCMCIA 10/100M Fast Ethernet Card into
           a PC Card slot.

       14. Windows 95 system will find the Ethernet PC Card.

       15. Select "Driver from disk provided by hardware manufacturer"
           item then click on [ OK ] button under "New Hardware Found"
           window.

       16. Please insert release driver disk into the CD-ROM drive.

       17. Specify the full path of the driver under "Install From Disk"
           window.

           Example: E:\PCMCIA\NETWARE\CLIENT32

       18. Click on [ Yes ] button under "System Settings Change" window
           to reboot your Windows 95 system.


 2.2   PCMCIA 10/100M Fast Ethernet Card Driver Reinstallation
 ------------------------------------------------------------------

        1. Assume your Windows 95 and Client 32 for Windows 95 system
           have been installed successfully.

        2. Start the Windows 95 system.
           Note:
                Don't insert your PCMCIA 10/100M Fast Ethernet Card
                into a PC Card slot.
        3. If you have installed PCMCIA 10/100M Fast Ethernet Card
           NDIS3 driver.
           Do the following steps.
           3.1 Double click on "My Computer" icon under desktop.
           3.2 Double click on "Control Panel" icon under "My Computer"
               window.
           3.3 Double click on "Network" icon under "Control Panel"
               window.
           3.4 Select "PCMCIA 10/100M Fast Ethernet Adapter" item and
               click on [ Remove ] button. Click on [ OK ] button after
               the adapter have been removed under "Network" window.
           3.5 Click on [ No ] button under "System Settings Change"
               window.
           3.6 Please change the directory to C:\WINDOWS\INF
               2.6.1 Click on [ Start ] button.
               2.6.2 Select "Programs" -> "MS-DOS Prompt" item.
               2.6.3 Type the following command.
                     C:\WINDOWS>cd inf
                     C:\WINDOWS\INF>del AX88190.INF
                     C:\WINDOWS\INF>exit

        4. Please insert PCMCIA 10/100M Fast Ethernet Card into
           a PC Card slot.

        5. Windows 95 system will find the PC Card.

        6. Select "Driver from disk provided by hardware manufacturer"
           item then click on [ OK ] button under "New Hardware Found"
           window.

        7. Please insert release driver disk into the CD-ROM drive.

        8. Specify the full path of the driver under "Install From Disk"
           window.

           Example: E:\PCMCIA\NETWARE\CLIENT32

        9. Click on [ Yes ] button under "System Settings Change" window
           to reboot your Windows 95 system.

 3.0  Installation Notes for Client 32 for DOSWIN users
 --------------------------------------------------------------------
   Notes: The PC Card should be enabled by Card services.           
          Please run EN190.EXE before starting Client 32 for DOSWIN.
                                                                    
          Content of CONFIG.SYS                                     
          ---------------------                                     
          Add below two lines to the CONFIG.SYS file                
                                                                    
          DEVICE=C:\DOS\EMM386.EXE NOEMS X=D000-D7FF                
          DEVICE=<PATH\EN190.EXE /irq=11  /iop=300 
          ; <PATH> is a directory that includes the EN190.EXE file.  
          ; Please refer to the "About PCMCIA" section in README file
            for details.


3.1  Windows 3.x Users
----------------------

    1. Start Windows 3.x system
    2. Run the Client 32 for DOSWIN installation program, using SETUP.EXE

        Example: >CD \<PATH>        ; <PATH> is Client 32 for DOSWIN
                 >SETUP.EXE

           or

          Double click SETUP.EXE in Files Manager windows

    3. Press ENTER to accept the agreement.
    4. Specify your target directory.

       Example: C:\NOVELL\CLIENT32  ; If you had chosen the C drive.

    5. Click "Other Boards..."

    6. Please insert release driver diske into the CD-ROM drive.

    7. Specify the full path of the driver, i.e. E:\<PATH>.

       Example: E:\PCMCIA\NETWARE\CLIENT32\AX88190.LAN

    8. Select "PCMCIA 10/100M Fast Ethernet Card".
    9. Specify your configuration for Additional Optional window
       then click "Next>" to continue.
   10. Restart your workstation, click "NetWare Login" to login to the
       NetWare server from NetWare Tools.

 3.2  DOS Users
 --------------------
        1. Run the Client 32 for DOSWIN installation program, using
           INSTALL.EXE.

           Example: >CD \<PATH>         ; <PATH> is Client 32 for DOSWIN
                    >INSTALL.EXE

        2. Press ENTER or YES to accept the agreement.
        3. Select "NetWare Client 32 for DOS".
        4. Use default value in Customize Support for Windows
           if you Select "NetWare Client 32 for Windows", as well.
        5. Press "F10" to continue.
        6. Select "32-bit LAN drivers" from LAN Driver Type window.
        7. Select "USER SPECIFIED 32 BIT DRIVER".
        8. Please insert release driver disk into the CD-ROM drive.
        9. Specify the full path of the driver, i.e. E:\<PATH>.

           Example: E:\PCMCIA\NETWARE\CLIENT32

       10. Select "PCMCIA 10/100M Fast Ethernet Card" from
           32-Bit Network Board Drivers window.
       11. Specify "Connection Type", "Driver Retries", "Frame Type"
           "Node Address" setting, then press "F10" to save.

           Example: Default value is as below
               Frame Type is Ethernet_802.2
               Slot       is 1

       12. Press "F10" to continue in Installation Configuration Summary
           window, if you accept.
       13. AUTOEXEC.BAT and CONFIG.SYS will be update after installation.
       14. Restart your workstation and load the NetWare networking
           software; it will connect to the Netware server.

4.0   Configuring LAN Adapter's Media Type and
      Installing Multiple LAN Adapters

 4.1
    Configuring LAN Adapter's Media Type:
    ---------------------------------
        The keyword "AUTOSENSE" is provided for LAN adapter to auto detect 
        the speed and the duplex mode.
        For example:
        LOAD C:\NOVELL\CLIENT32\AX88190.LAN AUTOSENSE

	The keyword "S100" is provided for user to force the media to
        100BASE-TX HALF DUPLEX mode.
        For example:
        LOAD C:\NOVELL\CLIENT32\AX88190.LAN S100

	The keyword "S10" is provided for user to force the media to
        10BASE-T HALF DUPLEX mode.
        For example:
        LOAD C:\NOVELL\CLIENT32\AX88190.LAN S10
 4.2
    Installing Multiple LAN Adapters:
    ---------------------------------
	The keyword  "SLOT" is provided for multiple LAN adapters in a
	single server by the driver LNAX100.LAN. So, add "SLOT" in LOAD
	commands. For example:

	C:\NOVELL\CLIENT32\NIOS.EXE
	LOAD LSLC32.NLM
	LOAD CMSM.NLM
	LOAD ETHERTSM.NLM
        LOAD AX88190 FRAME=Ethernet_802.2 SLOT=1
        LOAD AX88190 FRAME=Ethernet_802.2 SLOT=2
 4.3
    Sample Configuration Files:
    ---------------------------
      STARTNET.BAT (Client 32 for DOS will contain):

	  C:\NOVELL\CLIENT32\NIOS.EXE
	  LOAD C:\NOVELL\CLIENT32\LSLC32.NLM
	  LOAD C:\NOVELL\CLIENT32\CMSM.NLM
	  LOAD C:\NOVELL\CLIENT32\ETHERTSM.NLM
          LOAD C:\NOVELL\CLIENT32\AX88190.LAN FRAME=ETHERNET_802.2
          LOAD C:\NOVELL\CLIENT32\AX88190.LAN FRAME=Ethernet_802.3
          LOAD C:\NOVELL\CLIENT32\AX88190.LAN FRAME=Ethernet_II
          LOAD C:\NOVELL\CLIENT32\AX88190.LAN FRAME=Ethernet_SNAP



  *******************************************************************
  * Notes: The PC Card should be enabled by Card service.           *
  *       Please run EN190.EXE before starting Client 32 for DOSWIN.*
  *                                                                 *
  *        > EN190 /irq=11 /iop=300                                 *
  *******************************************************************
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 0.51