README.TXT Driver File Contents (16-503594.zip)

   LAN Manager Workstation/Server

   Introduction:
   -------------
   This document describes the procedure to setup LAN  Manager 2.1
   Workstation/Server driver for the PCMCIA 10/100M Fast Ethernet Card.

   You must run Socket/Card services device driver and/or Enable  program
   before you invoke any Ethernet driver. For the detailed information on
   how to insatll PCMCIA driver, please refer to the User's Manual or the
   "About PCMCIA" section in README file.

   Location of Driver:(DOS)\MSLANMAN.DOS\DRIVERS\ETHERNET\AX8190\AX8190.DOS


   Sample Configuration Files:
   ---------------------------
      CONFIG.SYS (for DOS will contain):

          DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /I:C:\LANMAN.DOS
          DEVICE=C:\LANMAN.DOS\DRIVERS\ETHERNET\AX8190\AX8190.DOS

   Setup Procedures:
   -----------------
      Before you start the installation process, make sure that the adapter
      is properly installed and  configured.  Make sure your Microsoft LAN
      Manager is properly installed.

      1. Run  the  Microsoft  Lan  Manager  SETUP  from DOS prompt. Select
         "Configuration" item, (this  driver isn't  included in  the  Lan
         Manager disk) and insert this driver diskette, select the PCMCIA
         Ethernet Card and follow the directions.

      2. When completed, reboot your computer .


   NOTES:
   ------

      1. Parameters for the PROTOCOL.INI file:

         DRIVERNAME: This is the one required parameter. See example at top
                     of this document for syntax.

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 1.39