;setup information file for Windows 95/98 [Version] Signature = "$Chicago$" Class = Net ClassGUID = {4d36e972-e325-11ce-bfc1-08002be10318} Provider = %Msft% LayoutFile = layout.inf [Manufacturer] %Manuf% = MANUF [ControlFlags] ExcludeFromSelect = PCI\VEN_1106&DEV_3043&REV_00, \ PCI\VEN_1106&DEV_3043&REV_01, \ PCI\VEN_1106&DEV_3043&REV_02, \ PCI\VEN_1106&DEV_3043&REV_03, \ PCI\VEN_1106&DEV_3043&REV_04 [MANUF] ; DisplayName Section DeviceID ; ----------- ------- -------- %VT3043.DeviceDesc% = VT3043.ndi, PCI\VEN_1106&DEV_3043 [VT3043.ndi] AddReg = VT3043.ndi.reg.WIN, FET.ndi.reg.WIN, FET.pci.reg, FET.con.reg ;----------------------------------------------------------------------------- ; VT3043 specific ; [VT3043.ndi.reg.WIN] HKR, , AdapterCFID, 0, "30431106" HKR, , AdapterType, 0, "5" HKR, , MediaType, 0, "1" HKR, , BusType, 0, "5" ; WIN_98 HKR, , OsId, 0, "00000008" HKR, Ndi, DeviceID, 0, "PCI\VEN_1106&DEV_3043" HKR, NDIS, MajorNdisVersion,1,04 HKR, NDIS, MinorNdisVersion,1,00 HKR, , DevLoader, 0, *ndis HKR, NDIS, LogDriverName, 0, "FETNDIS" HKR, NDIS\NDIS2, DriverName, 0, "FETND$" HKR, NDIS\NDIS2, FileName, 0, "fetnd.dos" HKR, NDIS\ODI, DriverName, 0, "FETODI" HKR, NDIS\ODI, FileName, 0, "fetodi.com" ;----------------------------------------------------------------------------- ; FET common driver parameters ; [FET.ndi.reg.WIN] HKR, Ndi\Interfaces, DefLower, 0, "ethernet" HKR, Ndi\Interfaces, LowerRange, 0, "ethernet" HKR, Ndi\Interfaces, DefUpper, 0, "ndis2,ndis3" HKR, Ndi\Interfaces, UpperRange, 0, "odi,ndis2,ndis3" HKR, , DeviceVxDs, 0, fetnd4.sys ; Install sections HKR, Ndi\Install, ndis3, 0, "FET.ndis3" HKR, Ndi\Install, ndis2, 0, "FET.ndis2" HKR, Ndi\Install, odi, 0, "FET.odi" ;----------------------------------------------------------------------------- ;----------------------------------------------------------------------------- ; PCI common parameters ; [FET.pci.reg] ; NDIS2 driver parameters: ; Auto Mode HKR, Ndi\params\AUTO, ParamDesc, 0, "[NDIS2] AUTO MODE" HKR, Ndi\params\AUTO, default, 0, 1 HKR, Ndi\params\AUTO, type, 0, enum HKR, Ndi\params\AUTO\enum, 1, 0, "Auto-Negotiation" HKR, Ndi\params\AUTO\enum, 0, 0, "Force-Mode" HKR, Ndi\params\AUTO, flag, 1, 10,00,00,00 ; Speed Mode HKR, Ndi\params\SPEED, ParamDesc, 0, "[NDIS2] SPEED MODE" HKR, Ndi\params\SPEED, default, 0, 100 HKR, Ndi\params\SPEED, type, 0, enum HKR, Ndi\params\SPEED\enum, 10, 0, "10M" HKR, Ndi\params\SPEED\enum, 100, 0, "100M" HKR, Ndi\params\SPEED, flag, 1, 10,00,00,00 ; Duplex Mode HKR, Ndi\params\FULLDUPLEX, ParamDesc, 0, "[NDIS2] DUPLEX MODE" HKR, Ndi\params\FULLDUPLEX, default, 0, 0 HKR, Ndi\params\FULLDUPLEX, type, 0, enum HKR, Ndi\params\FULLDUPLEX\enum, 0, 0, "Half_Duplex" HKR, Ndi\params\FULLDUPLEX\enum, 1, 0, "Full_Duplex" HKR, Ndi\params\FULLDUPLEX, flag, 1, 10,00,00,00 ; Slot Number HKR, Ndi\params\SLOT, ParamDesc, 0, "[NDIS2] SLOT NUMBER" HKR, Ndi\params\SLOT, default, 0, 1 HKR, Ndi\params\SLOT, type, 0, int HKR, Ndi\params\SLOT, min, 0, 1 HKR, Ndi\params\SLOT, max, 0, 16 HKR, Ndi\params\SLOT, flag, 1, 10,00,00,00 ; NDIS3 driver parameters: HKR, , ReceiveBuffers, 0, "40" HKR, , TransmitBuffers, 0, "8" HKR, , ReceiveThreshold, 0, "0" HKR, , TransmitThreshold, 0, "0" HKR, , BurstLength, 0, "1" HKR, , MapRegisters, 0, "8" HKR, , EarlyReceive, 0, "0" HKR, , EarlyTransmit, 0, "0" ;----------------------------------------------------------------------------- ; VT3043 common conection type parameter ; [FET.con.reg] ; Connection Type HKR, Ndi\params\ConnectionType, ParamDesc, 0, "Connection Type" HKR, Ndi\params\ConnectionType, default, 0, "0" HKR, Ndi\params\ConnectionType, type, 0, "enum" HKR, Ndi\params\ConnectionType\enum, 0, 0, "Auto-Negotiation" HKR, Ndi\params\ConnectionType\enum, 1, 0, "100BaseTx Half_Duplex" HKR, Ndi\params\ConnectionType\enum, 2, 0, "100BaseTx Full_Duplex" HKR, Ndi\params\ConnectionType\enum, 3, 0, "10BaseT Half_Duplex" HKR, Ndi\params\ConnectionType\enum, 4, 0, "10BaseT Full_Duplex" HKR, Ndi\params\ConnectionType, flag, 1, 28,00,00,00 ;HKR, Ndi\params\ConnectionType, flag, 1, 20,00,00,00 ;----------------------------------------------------------------------------- ; Installation for Windows ; [FET.ndis3] CopyFiles=FET.ndis3.CopyFiles,FET.inf.CopyFiles [FET.ndis3.CopyFiles] fetnd4.sys [FET.inf.CopyFiles] fetnd4.inf [FET.ndis2] CopyFiles=FET.ndis2.CopyFiles [FET.ndis2.CopyFiles] fetnd.dos [FET.odi] CopyFiles=FET.odi.CopyFiles [FET.odi.CopyFiles] fetodi.com ; DestinationDirs ; [DestinationDirs] FET.ndis3.CopyFiles = 11 ; LDID_SYS FET.ndis2.CopyFiles = 26 ; LDID_WINBOOT FET.odi.CopyFiles = 26 FET.inf.CopyFiles = 17 ; LDID_INF [SourceDisksNames] 50="The Fiber Adapter Drivers Directory","",0 [SourceDisksFiles] fetnd4.sys=50,,10000 fetnd.dos=50,ndis2,fetnd.dos,10000 fetodi.com=50,netware\dosodi,fetodi.com,10000 fetnd4.inf=50,,10000 [Strings] Msft = "Microsoft" ; OEM.... Manuf = "SURECOM" VT3043.DeviceDesc = "SURECOM EP-320FX/EP-320FX-C Fast Ethernet Fiber Adapter"Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.