################################################################################
Name: RTSNT.501 C/C+
Version: Ver. 5.501.1030.2001
Released By: Andy Liao
Release Date: 11/01/2001
Release Files:
Card.c Eeprom.c Eepromcp.c Intcp.c Interrupt.c Link.c Offloadcp.c
Pcb.c Power.c Recv.c Request.c Routines.c Rtl_dbg.c Rtl_init.c
Rtl_main.c Rtl_nic.c Rtl_req.c Rtsnt.c Send.c Rtsntp.RC
Command:
1. RTL8139 C+ Ndis4/5/51 drivers first released.
2. Ndis5/51 support IEEE802.1p Packet Priority.
3. Ndis5/51 support Task Offload TCP_IP_CheckSum and TCP_LargeSend.
4. This Ndis4 driver can NOT work at Win95 OSR2.
Win95a/OSR2 please using v.397 ndis3 driver.
5. These drivers could support CarBus device.
6. These drivers could support RTL8139/810X series adapter, too.
But, RTL8139/810X series adapter DO NOT support 802.1p and Task Offload.
################################################################################
Name: RTSNT.502 C/C+
Version: Ver. 5.502.1231.2001
Released By: Andy Liao
Release Date: 12/31/2001
Changed Files:
Interrupt.c Rtl_main.c Rtl_nic.c Rtl_req.c Rtsnt.c Link.c Card.c
Netrts5.inf Netrts51.inf Rtsnthlp.hlp
Command:
1. INF-file:
C+ mode: Rename "802.1p Priority" to "802.1Q/1p VLAN Tagging".
C/C+ : Removed "ChipOnCardbus" parameter for NDIS5/51.
C/C+ : Replace a new HELP file for NDIS4 (rtsnthlp.hlp).
2. C+ mode implemented a new tuned-collision algorithm.
3. NDIS51 C+ mode support IEEE802.1Q Vlan Packet (Ieee8021QInfo).
4. NDIS5/51 C mode support CPU C3 mode.
5. NDIS5/51 C mode could recover phy stops issue (S4->Shutdown).
6. NDIS5/51 C mode compatible with C3 resume machine (timing issue).
7. NDIS5/51 C mode Link_Change_WakeUp depend on OS (CheckForHang needn't enable).
################################################################################
Name: RTSNT.503 C/C+
Version: Ver. 5.503.325.2002
Released By: Andy Liao
Release Date: 03/25/2002
Changed Files:
Power.c Rtsnt.c Request.c Offloadcp.c
Netrts5.inf Netrts51.inf
Command:
1. C mode: Couldn't force speed under S3/disable_WOL system issue.
2. Fixed the LDPS parameter at S3 system by the OEM customer requirement.
2. For HCT10 updating to QFE5 new testkey:
1c_KernelCall, 2c_WOLPattern and 2c_OffloadChecksum (C+ only) fail issues.
################################################################################
Name: RTSNT.504 C/C+
Version: Ver. 5.504.613.2002
Released By: Andy Liao
Release Date: 06/13/2002
Changed Files:
Power.c Rtsnt.c Offloadcp.c
Netrts5.inf Netrts51.inf
Command:
1. WinXP resume has to less than 5 secs issue
2. Win2000/XP BootROM remote install un-link issue
3. Set EarlyTxFIFO as '4' to fix CLKRUN incompability issue
################################################################################
Name: RTSNT.505 C/C+
Version: Ver. 5.505.1004.2002
Released By: Andy Liao
Release Date: 10/04/2002
Changed Files:
Power.c Rtsnt.c Rtl_main.c
Netrts5.inf Netrts51.inf
Command:
1. C/C+ : Do not set PCI Latency Timer by NDIS driver
2. C mode: WinXP show un-link network mapping after re-start
3. C+ mode: Fixed system abnormal resume cause NIC couldn't load issue
################################################################################
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.