SetupVCTwin.txt Driver File Contents (

(C)Copyright 2003-2004 Marvell(R).
All rights reserved

SetupVCTwin.txt created 02-Sep-2004

Readme File for SETUPVCTWIN.exe v2.1.3.3
Marvell Yukon Ethernet Controller

This file contains
 1  Overview
 2  Required Files
 3  Installation Instructions
 4  Troubleshooting


1  Overview

The Virtual Cable Tester(TM) installation package 
contains the Marvell Virtual Cable Tester(TM) 

This README file explains how to install the Virtual 
Cable Tester(TM) Package on a machine running Windows 
2000, Windows XP and Windows Server 2003. 

   The Marvell Virtual Cable Tester(TM) can only be used 
with Windows 2000, Windows XP and Windows Server 2003 . 

2  Required Files

To install the Marvell Virtual Cable Tester(TM), the 
following file is required: 


3  Installation Instructions

   To install the Marvell Virtual Cable Tester(TM) make 
sure that you are logged in as a user with administrative 

To install the Marvell Virtual Cable Tester(TM), proceed 
as follows: 

1. Execute the setup file SetupVCTwin.exe . 

2. Follow the instructions of the installation procedure. 


4  Troubleshooting

If you should encounter any problems with your Marvell 
Virtual Cable Tester(TM) Package, please re-read the 
instructions above and the documentation supplied with 
the operating system carefully. 
Additionally refer to your system event log file (using 
the Event Viewer) and check it for entries from Marvell 
Virtual Cable Tester(TM). 

If your particular problem is not listed or the error 
persists, please send your system event log file or at 
least the event id number and the logging data (as WORDs) 
of the entries made by Marvell Virtual Cable Tester(TM) 
to our technical support. 

For further information please contact support.
*** End of Readme File ***

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 0.68