Installation
===============
Installing the driver
--------------------------
Read the installation instructions in the adapter manual carefully.
Follow these instructions to install the adapter in your computer.
NOTE: Do *not* try to install a driver for a PCI adapter using the
CONTROL PANEL / NETWORK / CONFIGURATION / ADD / ADAPTER utility of
Windows ME and 98SE. Windows ME and 98SE will always detect new PCI hardware
during the boot process. You will be asked for a respective driver
diskette if the system does not find the respective installation .INF
file in its system directories.
If you install Windows ME and 98SE with an already inserted Marvell Yukon
Ethernet Controller, then Windows ME and 98SE may identify the adapter as an
"Unknown Device".
In this case, remove this "Unknown Device" after you have completed the
installation of Windows ME and 98SE:
1. Click CONTROL PANEL / SYSTEM / DEVICE MANAGER.
2. In the "Device Manager" window click VIEW DEVICES BY TYPE.
3. Examine the list of devices under "Computer".
The "Unknown Device" is listed under "Other Devices".
4. Click OTHER DEVICES.
The "PCI Ethernet Controller" is displayed.
5. Click PCI ETHERNET CONTROLLER.
6. Click REMOVE.
7. Reboot Windows ME and 98SE.
8. Follow the installation instructions below.
With PCI adapters, due to the plug & play facility of PCI, the Windows ME
and 98SE system is able to find, identify, and configure an adapter
automatically.
To install the driver, proceed as follows:
1. Install the Marvell Yukon Ethernet Controller in your computer.
2. Start Windows ME and 98SE.
Windows ME and 98SE will detect the Marvell Yukon Ethernet Controller during
boot operation.
3. Follow the instructions given by Windows ME and 98SE to install the
driver.
4. If Windows ME and 98SE asks for a path, enter the path to the required
files depending on the type of medium (e.g. CD-ROM, floppy diskette,
network drive, etc.) containing the YUKONW9X driver files. 5. To
configure any driver options for your Marvell Yukon Ethernet Controller,
follow the instructions in the section "Driver Options" in this readme
file.
***
PS. Support CD Lan Driver Path:\Drivers\LAN\Marvell\Windows\Driver\Win9x\
The files are yukonw9x.htm,yukonw9x.inf,yukonw9x.sys and yukonw9x.txt.
If the amont of files,is less than four, they might be hid in system folder.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.