Installation
===============
Installing the driver
--------------------------
Read the installation instructions in the adapter manual carefully.
Follow these instructions to install the adapter in your computer.
1. Start Windows NT4 (x86).
2. Click START / SETTINGS / CONTROL PANEL / NETWORK.
3. Select ADAPTERS.
4. Click ADD.
5. Select HAVE DISK.
6. Depending on the type of installation medium used (e.g. CD-ROM, floppy
diskette, network drive, etc.)
enter the path to the required files.
7. Click OK.
8. Select the Marvell Yukon Ethernet Controller entry that matches your
adapter.
9. Click OK.
10. Select the appropriate configuration (see section "Driver Options"
in this readme file for details).
NOTE: We strongly recommend to install the latest Windows NT4 (x86) Service
Pack *after* successful installation of the driver.
11. Click OK.
12. Restart your system.
PS. Support CD Lan Driver Path:\Drivers\Lan\Marvell\Windows\Driver\NT4\
The files are gedialog.dll,gedialog.hlp,oemsetup.inf,yukonwnt.sys,yukonwnt.htm and yukonwnt.txt.
If the amont of files,is less than six, they might be hid in system folder.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.