; Copyright (c) 2004 Mobile Action Technology Inc.
[Version]
signature="$CHICAGO$"
Class =Modem
ClassGuid ={4d36e96d-e325-11ce-bfc1-08002be10318}
Provider=MobileAction
DriverVer =09/16/2004, 1.1.1.8
[ControlFlags]
ExcludeFromSelect = *
[SourceDisksNames]
1="MobileAction USB Installation Disk",,,
[SourceDisksFiles]
%MaUsb%.sys = 1
[DestinationDirs]
DefaultDestDir = 10,System32\Drivers
[Manufacturer]
"Mobile Action Technology Inc."=MAT
[MaUsb]
AddReg = MaUsb.AddReg, GenericAddReg
[MaUsb.NT]
AddReg = GenericAddReg
CopyFiles = MaUsb.CopyFiles
[MaUsb.AddReg]
HKR,,DevLoader,,*vcomm
HKR,,Contention,0,
HKR,, DCB, 1, 1C,00,00,00, 00,C2,01,00, 15,20,00,00, 00,00, 0a,00, 0a,00, 08, 00, 00, 11, 13, 00, 00, 00
[MaUsb.CopyFiles]
%MaUsb%.sys
[MaUsb.NT.Services]
AddService = %MaUsb%, 0x00000000, MaUsb.AddService
[MaUsb.AddService]
DisplayName = %MaUsb%
ServiceType = 1 ; SERVICE_KERNEL_DRIVER
StartType = 3 ; SERVICE_DEMAND_START
ErrorControl = 1 ; SERVICE_ERROR_NORMAL
ServiceBinary = %12%\%MaUsb%.sys
[MaUsb.NT.HW]
AddReg = MaUsb.NT.HW.AddReg
[MaUsb.NT.HW.AddReg]
HKR,,"LowerFilters",0x00010000,%MaUsb%
[GenericAddReg]
HKR,,Properties, 1, 00,00,00,00, FF,00,00,00, 00,00,00,00, 00,00,00,00, 00,00,00,00, 00,00,00,00, 00,08,07,00, 00,08,07,00
HKR, Responses, "<cr><lf>CONNECT<cr><lf>", 1, 02, 00, 00,08,07,00, 00,00,00,00
HKR,,MaxiumumPortSpeed, 1, 00,08,07,00
HKR,, FriendlyDriver,,unimodem.vxd
HKR,, PortSubClass,1, 02
HKR,, ConfigDialog,, modemui.dll
HKR,, EnumPropPages,, "modemui.dll,EnumPropPages"
HKR,, FClass, 1, c3,00,00,00
HKR, Fax, CL1FCS,, "2"
HKR,, PortDriver, 0, wdmmdmld.vxd
HKR,, DeviceType, 1, 01
HKR, Init, 1,, "AT<cr>"
HKR, Init, 2,, "AT &F<cr>"
HKR, Init, 3,, "AT V1E0S0=0&D2&C1<cr>"
HKR, Init, 4,, "AT +CMEE=1<cr>"
HKR, Monitor, 1,, "ATS0=0<cr>"
HKR, Monitor, 2,, "None"
HKR, Answer, 1,, "ATA<cr>"
HKR, Hangup, 1,, "+++ATH<cr>"
HKR,, Reset,, "AT&F<cr>"
HKR, Settings, CompatibilityFlags, 1, 01 ,00 ,00, 00
HKR, Settings, CallSetupFailTimer,, "S7=<#>"
HKR, Settings, DialPrefix,, "D"
HKR, Settings, DialSuffix,, ""
HKR, Settings, Prefix,, "AT"
HKR, Settings, Terminator,, "<cr>"
; DTE/DCE speeds will not be exact for generic modems because we will
; treat CONNECT ### as a DCE speed when some modems will report it as DTE.
HKR, Responses, "0<cr>", 1, 00, 00, 00,00,00,00, 00,00,00,00 ; OK - Command executed
HKR, Responses, "1<cr>", 1, 02, 00, 00,00,00,00, 00,00,00,00 ; CONNECT - Connection
HKR, Responses, "2<cr>", 1, 08, 00, 00,00,00,00, 00,00,00,00 ; RING - Ring signal indicated
HKR, Responses, "3<cr>", 1, 04, 00, 00,00,00,00, 00,00,00,00 ; NO CARRIER
HKR, Responses, "4<cr>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; ERROR - Invalid command
HKR, Responses, "5<cr>", 1, 02, 00, B0,04,00,00, 00,00,00,00 ; CONNECT 1200
HKR, Responses, "6<cr>", 1, 05, 00, 00,00,00,00, 00,00,00,00 ; NO DIALTONE - No dial tone detected
HKR, Responses, "7<cr>", 1, 06, 00, 00,00,00,00, 00,00,00,00 ; BUSY - Engaged (busy) signal
HKR, Responses, "8<cr>", 1, 07, 00, 00,00,00,00, 00,00,00,00 ; NO ANSWER
HKR, Responses, "<cr><lf>OK<cr><lf>", 1, 00, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>RING<cr><lf>", 1, 08, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>NO CARRIER<cr><lf>", 1, 04, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>ERROR<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>NO DIALTONE<cr><lf>", 1, 05, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>NO DIAL TONE<cr><lf>", 1, 05, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>BUSY<cr><lf>", 1, 06, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>NO ANSWER<cr><lf>", 1, 07, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 2400<cr><lf>", 1, 02, 00, 60,09,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 4800<cr><lf>", 1, 02, 00, C0,12,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 9600<cr><lf>", 1, 02, 00, 80,25,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 14400<cr><lf>", 1, 02, 00, 40,38,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 19200<cr><lf>", 1, 02, 00, 00,4B,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 28800<cr><lf>", 1, 02, 00, 80,70,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 33600<cr><lf>", 1, 02, 00, 40,83,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 38400<cr><lf>", 1, 02, 00, 00,96,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 57600<cr><lf>", 1, 02, 00, 00,e1,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 115200<cr><lf>", 1, 02, 00, 00,c2,01,00, 00,00,00,00
HKR, Responses, "<cr><lf>FAX<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>DATA<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>VOICE<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>RINGING<cr><lf>", 1, 01, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>DELAYED<cr><lf>", 1, 1D, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>DELAYED NUMBER<cr><lf>", 1, 1D, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>BLACKLISTED<cr><lf>", 1, 1C, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>BLACKLISTED NUMBER<cr><lf>", 1, 1C, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>+FCERROR<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>+CME ERROR: 0<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; Phone failure.
HKR, Responses, "<cr><lf>+CME ERROR: 1<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; No connection to phone.
HKR, Responses, "<cr><lf>+CME ERROR: 2<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; Phone modem link reserved.
HKR, Responses, "<cr><lf>+CME ERROR: 3<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; Operation not permitted.
HKR, Responses, "<cr><lf>+CME ERROR: 4<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; Operation not supported.
HKR, Responses, "<cr><lf>+CME ERROR: 5<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; PH-SIM card PIN required.
HKR, Responses, "<cr><lf>+CME ERROR: 6<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; PH-FSIM PIN required
HKR, Responses, "<cr><lf>+CME ERROR: 7<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; PH-FSIM PUK required
HKR, Responses, "<cr><lf>+CME ERROR: 10<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; SIM card not inserted.
HKR, Responses, "<cr><lf>+CME ERROR: 11<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; SIM card PIN required.
HKR, Responses, "<cr><lf>+CME ERROR: 12<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; SIM card PUK required.
HKR, Responses, "<cr><lf>+CME ERROR: 13<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; SIM card failure.
HKR, Responses, "<cr><lf>+CME ERROR: 14<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; SIM card busy.
HKR, Responses, "<cr><lf>+CME ERROR: 15<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; SIM card wrong.
HKR, Responses, "<cr><lf>+CME ERROR: 16<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; Incorrect password.
HKR, Responses, "<cr><lf>+CME ERROR: 20<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; Memory full.
HKR, Responses, "<cr><lf>+CME ERROR: 21<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; Invalid index.
HKR, Responses, "<cr><lf>+CME ERROR: 22<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; Not found.
HKR, Responses, "<cr><lf>+CME ERROR: 23<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; Memory failure.
HKR, Responses, "<cr><lf>+CME ERROR: 24<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; Text string too long.
HKR, Responses, "<cr><lf>+CME ERROR: 25<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; Invalid character in text string.
HKR, Responses, "<cr><lf>+CME ERROR: 26<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; Dial string too long.
HKR, Responses, "<cr><lf>+CME ERROR: 27<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; Invalid character in dial string.
HKR, Responses, "<cr><lf>+CME ERROR: 30<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; No network service
HKR, Responses, "<cr><lf>+CME ERROR: 31<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; Network timeout
HKR, Responses, "<cr><lf>+CME ERROR: 100<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; Unknown.
HKR, Responses, "<cr><lf>+CMS ERROR: ", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; CMS errors
[Strings]
MaUsb=D500M
[MAT]
"SAMSUNG USB Modem"=MaUsb,USB\VID_04E8&PID_663E_ModemInterface
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.