SCSITOOL multi scsi board config display and drive finder -u for help Copyright (c)BusLogic Corporation 1995. All rights reserved. V1.50g SCSITOOL is a BusLogic SCSI host adapter configuration display utility. /? /u /h Displays this message ** This program is for BusLogic MultiMaster SCSI Host Adapters only. This program is useful for checking the configuration of all BusLogic scsi boards installed in a system. This program does not require the host adapter's bios to be enabled and will check all valid I/O addresses for host adapters. It will also show the scsi devices installed on all host adapters. DMA and interrupt configuration conflicts are now flagged. Switches: /I Tests if interrupts operate properly. /T Total devices attached to all cards found. /Nxxx Disables check of board(s) at port xxx (330,334,230,234,130,134). /P Pauses between board displays. /FW filename Writes to filename the first board's EEPROM data. /F filename Uses filename to compare the first board's EEPROM. /R reset EEPROM's data to factory default.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.