1. ModemSetup-CDMA_USB.zip Driver
2. English.ini File Contents

English.ini Driver File Contents (ModemSetup-CDMA_USB.zip)

[RESOURCE]
IDD_DIALOG_PAGE1="Wireless Modem Setup"
IDC_PAGE1_ITEM1="Welcome to Mobile Action Wireless Modem Setup program. This program will install the modem components for $$ on your computer.\n\nIt is strongly recommended that you exit all Windows programs before running this Setup program.\n\nClick "Cancel" to quit Setup and then close any programs you are running. Click "Next" to continue the Setup process.\n\nWARNING: This program is protected by copyright law and international treaties.\n\nUnauthorized reproduction or distribution of this program, or any portion of it, may result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under law."

IDD_DIALOG_PAGE4="Detect the COM port of MA-CABLE"
IDC_STATIC_PAGE4_ITEM1="Please plug the MA-CABLE to the PC before detecting the COM port of MA-CABLE. Power on the handset and connect it to MA-CABLE."
IDC_STATIC_PAGE4_ITEM2="Warning!! The COM port device (modem, mouse, etc) may be affected by the detection program. You need to check "Setup COM port manually" if there is problem with detection.\n\nIf the screen shows no COM port available, maybe the COM port is being used by other device driver installed in the system. In this case, you may need to remove the device driver occupying the COM port."
IDC_CHECK_DONTDETECT="Setup COM port manually"

IDD_DIALOG_PAGE5="Setup COM port for modem"
IDC_PAGE5_ITEM1_S="The MA-CABLE is detected. \n\nThe Setup program will configure the modem parameters with the detected value."
IDC_PAGE5_ITEM1_F="The MA-CABLE is not found or you would like to setup port manually.\n\nThe Setup program will configure the modem parameters with the selected value."
IDC_PAGE5_ITEM1_N="Please select COM port"

IDC_PAGE5_ITEM2_S="Detected COM port:"
IDC_PAGE5_ITEM2_F="Select COM port"
IDC_PAGE5_ITEM2_N="Select COM port"

IDC_PAGE5_ERROR="Failed to install"
IDC_PAGE5_COMPORT_FAIL="The selected COM port is not available. Please make sure the selected COM port is valid and available."

IDD_DIALOG_PAGE5_5="Setup Modem Connection"
IDC_PAGE55_ITEM1="Do you want to setup the modem connection now?"
IDC_PAGE55_ITEM2="Yes"
IDC_PAGE55_ITEM3="No"

IDD_DIALOG_PAGE6="Finish Wireless Modem Setup"
IDC_PAGE6_ITEM1="Wireless Modem Setup is completed.\n\nYou need to restart the system to activate the installed modem components.\n\n Click "Finish" to complete the installation."
IDC_PAGE6_ITEM2="Restart the system"
IDC_PAGE6_ITEM3="I will restart the system later."

IDD_DIALOG_PAGE5_2="Network Configuration"
IDC_STATIC_PAGE5_2_ITEM1="Please select the Wireless Service Provider. Select your Wireless Service Area and then your Wireless Service Provider. If you are unable to find your Wireless Service Provider from the list, please select "Other Wireless Service Area" or "Other Wireless Service Provider"."
IDC_STATIC_SEL_OPERATOR="Configure Network"
IDC_STATIC_SELECT_RGN="Select Area"
IDC_STATIC_SELECT_OP="Select the Wireless Service Provider"

IDD_DIALOG_PAGE5_3="$$ Modem Configuration"
IDC_RADIO_MODEM_GSM="GSM Modem"
IDC_RADIO_MODEM_GPRS="GPRS Modem"
IDC_BUTTON_LOAD="Load"
IDC_STATIC_APN="APN (Access Point Name)"
IDC_STATIC_QOS="QoS (Quality of Service)"
IDC_STATIC_DNS="DNS (Domain Name Server)"
IDC_RADIO_APN="No APN"
IDC_RADIO_APN2="Assign APN"
IDC_RADIO_QOS="Default QoS"
IDC_RADIO_QOS2="Assign QoS"
IDC_RADIO_QOS3="No QoS"
IDC_PAGE53_MSG_MDMINSTALLED="Wireless Modem has been installed previously."
IDC_PAGE53_MSG_CONFIGAPN="Wireless Modem has been installed successfully, do you want to assign new parameters?"
IDC_RADIO_AUTO_DNS="Retrieve DNS server address automatically"
IDC_RADIO_ASSIGN_DNS="Use DNS server IP address below:"

IDD_DIALOG_PAGE7="Setup the dial-up Connection"
IDC_PAGE7_ITEM1="Enter the name for the dial-up connection:"
IDC_PAGE7_ITEM2="Enter the dial-up telephone number:"
IDC_PAGE7_ITEM1_F="The entered dial-up connection name already exists, please use a different name."

IDC_EDIT_APN="Please consult your Wireless Service Provider."
IDC_PAGE53_MSG_1="* Please consult your Wireless Service Provider for the required information."
IDC_PAGE53_MSG_2="No data input in the required field"
OTHERRGN="Other Wireless Service Area"
OTHEROP="Other Wireless Service Provider"

;;;
IDC_PAGE_ISP_TITLE="Select connection type"
IDC_PAGE_ISP_HEAD1="Your wireless carrier provides the following options for dial-up service. Please choose a connection type according to your subscription plan."
IDC_PAGE_ISP_CARRIER="Your wireless carrier:"
IDC_PAGE_ISP_CHOICE="Select a connection type:"
$DUN_MANUAL_EDIT$="Manually Edit"

IDC_PAGE_DUN_TITLE="Setup Dial-Up Connection"
IDC_PAGE_DUN_ENTRYNAME="Name of connection entry:"
IDC_PAGE_DUN_ENTRYNAME_DEF="My mobile phone internet connection"
IDC_PAGE_DUN_DIALNUM="Dial-up number:"
IDC_PAGE_DUN_ACCOUNT="Account"
IDC_PAGE_DUN_USERID="User name:"
IDC_PAGE_DUN_PASSWD="Password:"
IDC_PAGE_DUN_DNSBTN="DNS Setting..."
IDD_DIALOG_DNS_TITLE="DNS server address"

IDD_DIALOG_PHONENUM_TITLE="Enter your phone number"
IDD_DIALOG_PHONENUM="Please enter your phone number:"
IDD_DIALOG_PHONENUM_FMT="Please enter your %d digit phone number:"
IDC_USBMODEM_NOTACTIVE="USB modem driver not installed properly or not actived. Please plug the MA-CABLE with mobile phone to the PC and run installer again!"
IDC_NEEDLESS_IDPWD="[No need to specify User Name and Password]"

IDC_CONSULT_ISP="For Dial-up number, User name and Password, please consult your ISP for the information."
IDC_VZN_VEN="*A high speed data service. You will be charged by sending and receiving packets of data."
IDC_VZN_Q2N="*A regular speed data service. You will be charged by standard airtime."
IDC_VZN_MANUALLY="*You are allowed to enter the Dial-up number from a 3rd party ISP such as MSN and Earthlink. Enter the information provided by ISP in the next step."
IDC_SPRINT_SVN="*A high speed data service. You will be charged by sending and receiving packets of data."
IDC_SPRINT_SWW="*A regular speed data service. You will be charged by standard airtime."

LG_VX6000_MSG="To ensure successful dial-up connection, please set the Port setting of the phone to RS-232 (COM port) and set the Port Speed of your phone to be the same as PC, e.g. 115200bps before you dial-up to Internet each time.\n\nPlease follow these steps to complete settings:\nMenu->Settings->1x Data->Select Port->"RS-232 (COM Port)" and\nMenu->Settings->1x Data->Port Speed->"115200"