1. swann28.exe Driver
2. MDMSWANN.INF File Contents

MDMSWANN.INF Driver File Contents (swann28.exe)

; Windows Modem Setup File
; Copyright 1994 Microsoft Corp.
;
; Manufacturer:   Swann

[Version]
Signature="$CHICAGO$"
Class=Modem
Provider=%Mfg%
INFWizardVer=0.04

[Manufacturer]
%Mfg% = Models

; Modem models

[Models]
%Modem1% = Modem1, Swann Smart V.34             ; Swann Smart V.34


; Installation sections

[Modem1]        ; Swann Smart V.34
AddReg=All, MfgAddReg, Modem1.AddReg


; AddReg sections

[Modem1.AddReg] ; Swann Smart V.34
HKR,, DeviceType, 1, 01      ; External
HKR,, Properties, 1, c0,01,00,00, ff,00,00,00, ff,00,00,00, 07,00,00,00, 0f,00,00,00, f7,03,00,00, 00,c2,01,00, 80,70,00,00
HKR,, FClass, 1, 0f,00,00,00


; User visible strings

[Strings]
ClassName = "Modem"
Mfg = "Swann"

; Model strings

Modem1="Swann Smart V.34"


; --------------------------------------------------------------
; Common Registry Sections

; The [All] section is installed for all modems.

[All]
HKR,,FriendlyDriver,,unimodem.vxd
HKR,,DevLoader,,*vcomm
HKR,,PortSubClass,1,02
HKR,,ConfigDialog,,modemui.dll
HKR,,EnumPropPages,,"modemui.dll,EnumPropPages"
HKR, Init,      1,, "AT<cr>"
HKR, Responses, "<cr><lf>OK<cr><lf>", 1, 00, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>ERROR<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00

; The [Null] section filters out empty registry key lines.
; It should be deleted when the INF is final.

[Null]
HKR, Settings, ErrorControl_On,, 
HKR, Settings, ErrorControl_Off,, 
HKR, Settings, ErrorControl_Forced,, 
HKR, Settings, Compression_On,, 
HKR, Settings, Compression_Off,, 
HKR, Settings, Cellular_On,, 
HKR, Settings, Cellular_Off,, 
HKR, Fax, Class1FlowOff,, 
HKR, Fax, Class1FlowHW,, 
HKR, Fax, Class1FlowSW,, 
HKR, Fax, Class2FlowOff,, 
HKR, Fax, Class2FlowHW,, 
HKR, Fax, Class2FlowSW,, 


; The [MfgAddReg] section contains the first modem's Init,
; Settings, and Responses keys.  It is installed for all
; modems in the INF.  This eliminates duplication of common
; registry keys in the model registry sections, above.
; To avoid as much duplication as possible, the first modem
; added to the INF should be the one with the most possible
; command/response strings.

[MfgAddReg]
HKR,, InactivityFormat,, "seconds"
HKR, Init,      2,, "AT &F%C0 <cr>"
HKR, Monitor,   1,, "None"
HKR, Hangup,    1,, "ATH<cr>"
HKR, Answer,    1,, "ATA<cr>"
HKR,, Reset,, "AT&F<cr>"
HKR, Settings, Prefix,, "AT"
HKR, Settings, Terminator,, "<cr>"
HKR, Settings, DialPrefix,, "D"
HKR, Settings, DialSuffix,, ";"
HKR, Settings, SpeakerVolume_Low,, "L0"
HKR, Settings, SpeakerVolume_Med,, "L2"
HKR, Settings, SpeakerVolume_High,, "L3"
HKR, Settings, SpeakerMode_Off,, "M0"
HKR, Settings, SpeakerMode_Dial,, "M1"
HKR, Settings, SpeakerMode_On,, "M2"
HKR, Settings, SpeakerMode_Setup,, "M3"
HKR, Settings, FlowControl_Off,, "&K0"
HKR, Settings, FlowControl_Hard,, "&K3"
HKR, Settings, FlowControl_Soft,, "&K4"
HKR, Settings, ErrorControl_On,, "\N3"
HKR, Settings, ErrorControl_Off,, "\N0"
HKR, Settings, Compression_On,, "%C3"
HKR, Settings, Compression_Off,, "%C0"
HKR, Settings, Modulation_CCITT,, 
HKR, Settings, Modulation_Bell,, 
HKR, Settings, SpeedNegotiation_Off,, "N0"
HKR, Settings, SpeedNegotiation_On,, "N1"
HKR, Settings, Pulse,, "P"
HKR, Settings, Tone,, "T"
HKR, Settings, Blind_Off,, "X4"
HKR, Settings, Blind_On,, "X3"
HKR, Settings, CallSetupFailTimer,, "S7=<#>"
HKR, Settings, InactivityTimeout,, "S30=<#>"
HKR, Fax, Class1DTESpeed,, "AUTO"
HKR, Responses, "0<cr>", 1, 00, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "1<cr>", 1, 02, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "2<cr>", 1, 08, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "3<cr>", 1, 04, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "4<cr>", 1, 03, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "5<cr>", 1, 02, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "6<cr>", 1, 05, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "7<cr>", 1, 06, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "8<cr>", 1, 07, 00, 00,00,00,00, 00,00,00,00