README.txt Driver File Contents (L5_v20sl.zip)

          P6I440LX Legend V AWARD BIOS V2.0SL release note.

This disk contains two files:L5_V20SL.BIN and README.TXT

1.The checksum of L5_V20SL.BIN is : EB59(Hex) ;

2.CBLOGO.EXE is a logoeasy utility which allow you to make your own system boot log,
  you may get its usage by typing "a:\cblogo" in dos command promt with this disk in
  your drvie A.

3.LF.EXE is a disk low level format utility.

4. How to use FLASH.EXE utility:    
   This is a flash memory write/read utility.
IMPORTANT NOTE:
   The FLASH utility could not correctly run in windows (virtual 8086)
   MS-DOS mode. It must be proceeded with the following steps:
      1.Create a bootable system floppy diskette by typing "FORMAT A:/S"
        from the dos prompt under DOS6.XX or WINDOWS9X environment.
      2.Boot system with diskette.
      3.Then run the FLASH utility.
Usage:
      FLASH [BIOSfile] [/c[<command...>]][/n]
      FLASH [BIOSfile] [/g]
/c: Flash memory will clear previous settings. Default allows settings to
    remain. <command> function definition:
      c: clear CMOS [Default];        p: clear PnP;
      d: clear DMI.
/n: Program BIOS without prompting. If this option is chosen:
      Be sure your new BIOS is compatible with your MB. If not, the system
      are damaged.
/g: Get BIOSfile from BIOS ROM.
Examples:
      A:\BIOS\FLASH.EXE BIOSfile.bin
      A:\BIOS\FLASH.EXE BIOSfile.bin /cdpc/n
      A:\BIOS\FLASH.EXE BIOSfile.bin /g

Warning: 
   Avoid power-off incidently in upgrading procedure, or system would fail
   to reboot!

UPDATE DATE: 01/05/1999
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 1.86