P6I440LX/L8 AWARD BIOS V2.0L release note.
This disk contains two files:L8_V20L.BIN and README.TXT
1.The checksum of L8_V20L.BIN is 0076(Hex) ;
2. How to use FLASH.EXE utility:
This is a flash memory write/read utility.
IMPORTANT NOTE:
The FLASH utility could not correctly run in windows (virtual 8086)
MS-DOS mode. It must be proceeded with the following steps:
1.Create a bootable system floppy diskette by typing "FORMAT A:/S"
from the dos prompt under DOS6.XX or WINDOWS9X environment.
2.Boot system with diskette.
3.Then run the FLASH utility.
Usage:
FLASH [BIOSfile] [/c[<command...>]][/n]
FLASH [BIOSfile] [/g]
/c: Flash memory will clear previous settings. Default allows settings to
remain. <command> function definition:
c: clear CMOS [Default]; p: clear PnP;
d: clear DMI.
/n: Program BIOS without prompting. If this option is chosen:
Be sure your new BIOS is compatible with your MB. If not, the system
are damaged.
/g: Get BIOSfile from BIOS ROM.
Examples:
A:\BIOS\FLASH.EXE BIOSfile.bin
A:\BIOS\FLASH.EXE BIOSfile.bin /cdpc/n
A:\BIOS\FLASH.EXE BIOSfile.bin /g
Warning:
Avoid power-off incidently in upgrading procedure, or system would fail
to reboot!
The lastest updated date: 1999-3-11
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.