1. p150.zip Driver
2. L50STEK1.txt File Contents

L50STEK1.txt Driver File Contents (p150.zip)

*************************************************************
      *** Conversion Program DDC file to Txt ***
      Input File for Conversion: L50STEK1.txt 
*************************************************************

Manufacture Name: PCL
ID Product Code : 1283 (503h)
Serial Number   : 20030915
Manufacture Week: 38
Manufacture Year: 2003
Version:1, Revision:3 

***** Basic Display Parameter/Feature *****
Analog/Digital Input: Analog  Input
Signal Level: 0.700V/0.300V
Sync Type   : Seperate Sync
Maximum H.Image: 30 cm
Maximum V.Image: 22 cm
GAMMA Value: 2.000000

 *** DPMS feature... ***
Stand By    : YES
Suspend     : YES
Active Off  : YES
Display Type:RGB color display
Preferred Timing: NO
GTF Supported: NO

 *** Color Characteristics ***
 Redx   = 0.61719
 Redy   = 0.34668
 Greenx = 0.29004
 Greeny = 0.59277
 Bluex  = 0.14844
 Bluey  = 0.09961
 Whitex = 0.31348
 Whitey = 0.32910

 *** Support Timming ***
 720x400@70Hz
 640x480@60Hz
 640x480@72Hz
 640x480@75Hz
 800x600@60Hz
 800x600@75Hz
 1024x768@60Hz
 1024x768@70Hz
 1024x768@75Hz

 *** Standard Timing Identification ***

 *** Detailed Timming Discription 0 *** 
 Pixel Clock: 78.750MHz
 Horizontal Active  : 1024
 Horizontal Blanking: 288
 Vertical Active    : 768
 Vertical Blanking: 32
 H sync offset: 16,  H sync width: 96 
 V sync offset: 1,   V sync width: 3 
 H_image size :304mm,V_image size: 228mm 
  Display Mode: Non-interlaced Mode
  Display Type: Normal Display, No stereo
  Sync Type   : Digital Seperate
  Vertical Polarity  : Positive
  Horizontal Polarity: Positive

	<--- H_Frequency: 60.02 KHz
	<--- V_Frequency: 75.03 Hz

 ***** Monitor Descriptor (Freq. Range Limit) *****
 VFreq range: 56 - 75 Hz
 HFreq range: 31 - 60 KHz
 MaxPixel Clock: Not defined.
 Unused GTF timing...

 ***** Monitor Descriptor (Monitor Name) *****
 Monitor Name: Prestigio 

 ***** Monitor Descriptor (Monitor Name) *****
 Monitor Name:  P151 

******************* End of Conversion ***********************

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.