*****************************************************************************
* *
* RP-1651W 10Mbps PCI Ethernet Adapter V.2 *
* *
* Packet Driver for DOS Workstation *
* *
*****************************************************************************
Installation:
=============
Packet Driver Installation:
---------------------------
1. Copy the Packet driver to your hard disk, suppose you copy it to
C:\PKTDRV directory.
EX: copy a:\pktdrv\940-pd.com c:\pktdrv\940-pd.com
2. Add the following line to C:\AUTOEXEC.BAT
C:\PKTDRV\940-PD
Notes:
------
1. Load the packet driver using the software interrupt.
Usage: 940-PD [packet_int [ID0-ID1-ID2-ID3-ID4-ID5] ]
Example: 940-PD or 940-PD 0x70
The required parameter is the software interrupt. A packet driver
needs to have a software interrupt assigned to it for other
programs to access it. The default interrupt is 0x60.
2. Unload the packet driver using the software interrupt.
Usage: 940-PD -U/-u packet_int
Example: 940-PD -u 0x60
3. Installing Multiple LAN Adapters:
Usage: 940-PD [packet_int [ID0-ID1-ID2-ID3-ID4-ID5] ]
Example: 940-PD 0x60 0x00-0x10-0xb5-0x12-0x34-0x56
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.