TABLE OF CONTENTS
-----------------
I. Files on Disk
II. Updates/Additional Information
I. FILES ON DISK
----------------
Utilities
---------
SETUP EXE - Decompression utility to load software.
CLR COM - Clear screen utility for enhanced text modes.
ESU COM - Enhanced text mode selection utility.
README COM - Types file README.TXT.
README TXT - This file.
HTVGA EXE - Screen save and emulation utility.
ALTPARM EXE - Alternate monitor parameter utility.
ALTPARM DAT - Data file for ALTPARM.EXE
ERGO600 ALT - Parameter file: 800 x 600 at 72 Hz.
ERGO480 ALT - Parameter file: 640 x 480 at 72 Hz.
ERGO768 ALT - Parameter file: 1024 x 768 at 62.5 KHz/72 Hz.
ERGO768A ALT - Parameter file: 1024 x 768 at 58.1 KHz/72 Hz.
VESA1K70 ALT - Parameter file: 1024 x 768 at 70 Hz.
76HZ480 ALT - Parameter file: 640 x 480 at 76 Hz.
76HZ600 ALT - Parameter file: 800 x 600 at 76 Hz.
56HZ600 ALT - 800 x 600 for 56 Hz monitors such as NEC 2A.
NANA9070 ALT - Parameter file for Nanao 9070.
NEC4D ALT - Parameter file for NEC MultiSync 4D.
NEC4FG ALT - Parameter file for NEC MultiSync 4FG.
MITS6605 ALT - Parameter file for Mitsubishi 6605.
SONY1304 ALT - Parameter file for Sony 1304.
NANA8060 ALT - Parameter file for Nanao 8060.
NANA9500 ALT - Parameter file for Nanao 9500.
INTRLACE ALT - Parameter file for Interlaced Monitors.
ELXV14 ALT - Parameter file for Elonex 14" Non-Interlaced Monitors.
ELXV17 ALT - Parameter file for Elonex 17" Monitors.
HTVESA COM - VESA Bios Extension TSR.
Lotus 2.0
---------
GD720V20 DRV - 720 x 540 graphics driver.
GD800V20 DRV - 800 x 600 graphics driver.
VD80X60 DRV - 80 x 60 text driver.
VD100X60 DRV - 100 x 60 text driver.
VD132X25 DRV - 132 x 25 text driver.
VD132X43 DRV - 132 x 43 text driver.
Word Perfect 5.0
----------------
WP800 WPD - 800 x 600 - 16 color graphics driver.
WP1KC16 WPD - 1024 x 768 - 16 color graphics driver.
Word Perfect 5.1
----------------
OEMGRAPH VRS - Graphics driver file.
OEMTEXT VRS - Text driver file.
Word 5.x
--------
VIDSETUP EXE - Resolution setup program.
SCREEN VID - Driver file.
GEM/3 & Ventura
---------------
SD800 VGA - GEM & Ventura 800 x 600 graphics driver.
SD1024C VGA - GEM & Ventura 1024 x 768 graphics driver.
AutoCAD
-------
VGAREL11 COM - AutoCAD 9, 10 and 11 Real Mode driver.
R11INST EXE - AutoCAD 11 installation program.
ADIDISP EXP - AutoCAD 386 Protected Mode driver.
CADVANCE
--------
GS1024 DRV - 1024 x 768 16 color driver.
GS800 DRV - 800 x 600 16 color driver.
P-CAD
-----
DPCAD1K DRV - 1024 X 768 with 16 colors.
DPCAD640 DRV - 640 x 480 with 16 colors.
DPCAD720 DRV - 720 x 540 with 16 colors.
DPCAD800 DRV - 800 x 600 with 16 colors.
Generic CADD
------------
GCAD1024 VGD - 1024 x 768 with 16 colors.
GCAD2480 VGD - 640 x 480 with 256 colors.
GCAD2600 VGD - 800 x 600 with 256 colors.
VersaCAD Design
---------------
VCAD1024 EXE - 1024 x 768 with 16 colors.
VCAD800 EXE - 800 x 600 with 16 colors.
VCAD53 CFG - VersaCAD 5.3 configuration file.
VCAD54 CFG - VersaCAD 5.4 configuration file.
VersaCAD/386
------------
VCAD1KP EXE - VersaCAD/386 1024 x 768 with 16 colors.
VCAD386 CFG - VersaCAD/386 configuration file.
Presentation Manager
--------------------
MONMS DLL - Monitor file for NEC MultiSync monitors.
MON9070 DLL - Monitor file for Nanao 9070 monitors.
MONMS2A DLL - Monitor file for NEC MultiSync 2A monitors.
MONXL DLL - Monitor file for NEC MultiSync XL monitors.
MONXLI DLL - Monitor file for NEC XL (1024x768 interlaced mode) monitors.
MONMS2 DLL - Monitor file for MultiSync II monitors.
MONPLUS DLL - Monitor file for MultiSync Plus monitors.
MONPLUSI DLL - Monitor file for NEC Plus (1024x768 interlaced mode) monitors.
MON8060 DLL - Monitor file for Nanao 8060 monitors.
MON9070I DLL - Monitor file for NANAO 9070 (1024x768 interlaced mode).
MONSONY DLL - Monitor file for Sony monitors.
MONSONYI DLL - Monitor file for SONY Multiscan (1024x768 interlaced mode).
MONXLO DLL - Monitor file for old MultiSync XL monitors.
VGA640 DLL - 640 x 480 16 color driver file.
VGA720 DLL - 720 x 540 16 color driver file.
VGA800 DLL - 800 x 600 16 color driver file.
VGA1024 DLL - 1024 x 768 16 color driver file.
II. UPDATES/ADDITIONAL INFORMATION
------------------------------------
Windows NT October Beta Driver Installation
-------------------------------------------
NOTE: This installation procedure assumes that you have installed and are
running the October 1992 Windows NT Beta. Because of
incompatibilities between the current setup program and Windows NT,
this installation must be performed manually.
This driver works for the HT216-32 and the WIN.VGA, and requires
1MB of video memory.
1) Format a blank floppy disk to copy the files to.
2) Create a zero length file called "DISK2" on the newly formatted floppy.
3) Create a directory called "I386" on the floppy.
4) Pkunzip NT.ZIP and copy the files "HT216_32.SYS" and "OEMSETUP.INF" to
the "I386" directory on the floppy.
5) Copy the file "VGA.DLL" from your "WINNT\SYSTEM\" directory to the
the directory on the floppy.
6) Start Windows NT Setup
7) When prompted for the full path of the Windows NT Distribution files,
enter the drive letter of the drive containing the floppy you created.
For example, if you used the "A" drive, the full path would be "A:\I386\"
8) Click on Continue
9) Select the Change System Settings option.
10) Click on the right pulldown button for the Display option.
11) Select the "Other (requires a disk from a hardware manufacturer)"
option.
12) Enter the same path to this prompt as you did in step 6.
13) Select the "Headland HT216-32 VGA 1MB, 1024x768, 16 colors" option.
14) Click "OK"
15) Exit Setup
16) Reboot system to use the installed driver.
Windows 3.1 Driver Installation
-------------------------------
NOTE: This Windows installation procedure assumes that you have already
used the SETUP utility to extract the Windows driver off utility
disk and have installed them to the Window's SYSTEM directory.
If you have not done so, please do so now before proceeding.
1) Install Windows using "VGA" as the display option.
Choosing another driver will lead to incorrect results.
2) While running Windows in VGA mode, select the CONTROL PANEL icon
in the MAIN program group. Next select the HTDISPLAY icon.
3) Select the desired color depth, supported font size, and supported
screen resolution. When the desired display configuration is
set, select OK to set the configuration.
4) Next, you will be prompted to either use the CURRENT screen
drivers or NEW screen drivers from drive A. Select the appropriate
option.
5) Hit RESTART to run Windows in your new display configuration.
In the future, to change the display configuration repeat steps
2, 3, 4, and 5.
Windows 3.0 Driver Installation (256 Color Only)
------------------------------------------------
NOTE: This Windows 3.0 installation procedure assumes that you have already
used the SETUP utility to extract the Windows driver off utility disk
and have installed them to the Windows 3.0 SYSTEM directory. If you
have not done so, please do so now before proceeding.
1) Install Windows 3.0 using "VGA" as the display option.
Choosing another driver will lead to incorrect results.
2) Before starting Windows 3.0, use a text editor (such as DOS EDIT.COM)
to edit the \WINDOWS\SYSTEM.INI file.
3) In SYSTEM.INI, under the [boot] section, edit the "display.drv=vga.drv"
line to read "display.drv=ht256.drv".
4) At the end of SYSTEM.INI, add a new section labeled [v7vga.drv] as follows:
[v7vga.drv]
WidthXHeight=1024x768
If you would like a smaller resolution, you may use 640x480 or 800x600.
5) Start Windows 3.0.
IBM OS/2 2.X Driver Installation
--------------------------------
NOTE: If you do not have OS/2 2.1+, contact IBM and request OS/2 2.1+
(beta or release). The following assumes you are installing
OS/2 2.1+.
The following steps are required to add OS/2 2.1 support for the HT216
family of SVGA controllers. These steps assume the HT216 distribution
disk is in drive A and OS/2 is on drive C.
1) Install OS/2 2.1 normally.
2) Create the HEADLAND subdirectory.
a. Open a DOS window.
b. Type "md os2\headland".
3) Unzip the HT216 OS/2 support files.
a. Type "A:".
b. Type "pkunzip os2_2x c:\os2\headland".
4) Rename SVGA.EXE.
a. Type "C:".
b. Type "cd \os2".
c. Type "rename SVGA.EXE SVGA_IBM.EXE"
d. Type "copy headland\SVGA.EXE".
5) Rename VSVGA.SYS
a. Type "cd mdos".
b. Type "rename "VSVGA.SYS VSVGAIBM.SYS".
c. Type "copy ..\headland\VSVGA.SYS".
d. Type "exit".
6) Update CONFIG.SYS using "OS/2 System Editor
a. Open the file C:\CONFIG.SYS with OS/2 System Editor.
b. Find the line that starts with "LIBPATH=.;C:\..."
c. Modify this line to include the HEADLAND subdirectory.
"LIBPATH=C:\OS2\HEADLAND;.;C:\..."
d. Save the changed file.
7) Restart OS/2.
8) Change display resolution.
a. Start "Selective Install" from the System Setup folder.
b. Select "Super Video Graphics Array" for Primary display
if it is not already chosen.
c. Select "OK" button.
d. Select "INSTALL" button.
e. After a few minutes of processing, a dialog box will appear
with a choice of display resolutions. Choose one.
9) Restart OS/2. Your new resolution will be in use.
IBM OS/2 1.X Installation
-------------------------
Please follow directions in IBM OS/2 1.X manual.
GEM 3.x and VENTURA 2.0 Installation
------------------------------------
GEM and VENTURA drivers are now installed and configured
by SETUP.
To install GEM 3.x drivers users should install GEM using
any VGA mode driver. Setup will automatically replace the
current driver with 800x600x16 or 1024x768x16. To return
to default driver, users will now have to reconfigure from
GEM diskettes.
To install VENTURA 2.0 user must install for the following
VGA Option:
"A IBM VGA or compatible (640x480) 16 of 256K colors or greys."
Setup will automatically replace the current driver with 800x600x16
or 1024x768x16. To return to default driver, users will now have
to reconfigure from Ventura diskettes.
NOTE: VENTURA INSTALLATION DOES NOT REQUIRE KNOWING IF PROFESSIONAL
EXTENSIONS WERE INSTALLED ANY LONGER.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.