Welcome to the Duxbury Modems NT 4 Driver!
==========================================
Version 1.9
Used with driver version 4.23
This version has been adopted and modified from the WIN98 Driver Disk
====================================================================
Installing a Duxbury Modem
====================================================================
Introduction:
NT does not support PnP as found in WIN95/98. You always need
to restart your machine to install new hardware.
1. If you have installed any modem on this comm port before,
please remove it first. (START, Settings, Control Panel
Modems, highlight and click Remove button)
- Better results, but not necessary!
2. To install the modem, click START, Settings, Control Panel.
Double click the Modems icon. If you have never
installed a modem before, the Modem Install Wizard will
automatically start. If you have installed modems on your
PC before, ensure that there are no current modems installed
on the comm port you are about to use for your new
isntallation. You can check this by looking at the associated
comm port from the list of installed modems.
3. Windows NT Modem Install Wizard will guide you through the
installation, be it an Internal, External or a PCMCIA type
modem you are installing. You must check the box where the
Install Wizard says "Don't detect my modem; I will select it
from a list". Then click next.
4. Click the "Have Disk" button, and type a: as the path.
5. Select the appropriate modem from the list of Duxbury Modems.
====================================================================
Duxbury Networking (Cape)
220 Loop Street
Cape Town 8000
Ph: +27 21 423 7115
Fax: +27 21 423 2463
Duxbury Networking (Gauteng)
Block 2, Riviera Office Park Apartments
c/o Oxford & North Road
Riviera - Johannesburg
Ph: +27 11 646 3323
Fax: +27 11 646 3079
http://www.duxbury.co.za
====================================================================
Duxbury NT4 modem driver.
Version 1.9
Last update: 23 November 2000
Copyright 1996 - 2001 Duxbury Networking
«EOF»
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.