3Com Corporation NDIS 2.01 Drivers Installation Notes Banyan VINES ------------ To install VINES 6.0 software on a DOS NDIS workstation, follow these instructions. DOS must be installed on the target workstation C: drive, or you must have a bootable DOS floppy. 1. Use the DOS MD command to create a subdirectory called \VINES. 2. Copy the contents of the VINES LAN S/W (DOS) Install diskette into the \VINES subdirectory. 3. Copy the contents of the NDIS subdirectory on the VINES LAN S/W (DOS) 2 of 2 diskette into the \VINES subdirectory. 4. Copy the PROTOCOL.INI fragment from the \MSLANMAN.DOS\DRIVERS\ETHERNET\ELPC3 subdirectory on the EtherDisk diskette to the \VINES subdirectory. 5. Copy 3CELCM.EXE and ELPC3X.DOS from the NDIS\DOS directory of the Etherdisk to the \Vines subdirectory. 6. Edit the PROTOCOL.INI file to read as follows: [PROTOCOL MANAGER] DRIVERNAME = PROTMAN$ [VINES_XIF] DRIVERNAME = NDISBAN$ BINDINGS = ELINKPC3 [ELINKPC3] DRIVERNAME = ELPC3$ 7. Run the PCCONFIG.EXE program located in the \VINES subdirectory. 8. Select option 1, Network Card Settings. 9. Select the NDIS Ethernet option. 10. The NDIS workstation screen appears. Enter the IRQ that you selected for the EtherLink/PC Card adapter. Select the IRQ using the Configuration and Diagnostic Program. 11. Press F10 twice to return to the first menu. Select option 2, Login Environment Settings. In the next screen select option 1, Default Communications Driver. In the next screen scroll down to NDIS Ethernet and press enter. Exit PCCONFIG by pressing F10 at each stage to save the new configuration. 12. Edit the CONFIG.SYS file and add the following lines, substituting A: for C: for a floppy disk installation. DEVICE = C:\VINES\PROTMAN.DOS /I:C:\VINES DEVICE = C:\VINES\3CELCM.EXE DEVICE = C:\VINES\ELPC3X.DOS 13. Add the following line to the AUTOEXEC.BAT file. cd \VINES BAN cd \ BAN loads the NDISBAN drivers and reads the PCCONFIG.DB file to invoke changes made during the PCCONFIG stage. ========================================================= SYSTEM.INI information ======================= In order for the modem to function correctly in MS Windows, add the following commands to your Window's SYSTEM.INI file under the [386Enh] category: (In case they are not there already) [386Enh] : : COM1Base=3F8 COM1Irq=4 COM2Base=2F8 COM2Irq=3 COM3Base=3E8 COM3Irq=4 COM4Base=2E8 COM4Irq=3 ========================================================= ========================================================= Please Note ============ Although the driver name is ELPC3X.DOS, the internal driver name (used in PROTOCOL.INI) is ELPC3$ ========================================================= (%VER NDIS - Banyan VINES v2.0e)Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.