1. es064.exe Driver
2. README File Contents

README Driver File Contents (es064.exe)

		 DRIVERS USAGE EXPLAINATION
		 ==========================

  With this utility diskette,you will find the following
files:

		    2000SH.OBJ
		    A2000.OBJ
		    B2000.OBJ
		    C2000.OBJ
		    D2000.OBJ
		    2000.LAN
		    S2000.LAN
		    NBE634.EXE
		    README
		    FTP_TCP  <DIR>
		    V20A     <DIR>
		    V3.00    <DIR>
		    V3.1X    <DIR>

The files in root directory 2000SH.OBJ.....S2000.LAN are provided
for the NOVELL NetWare ver 2.1X and  later, while  the	files
in V20A <DIR> are appropriate for NOVELL NetWare ver 2.0a only.
Please refer to the user manuals and NOVELL NetWare
installation manual for details during installation.

The files in directory V3.00 and V3.1X support for Netware 386
ver 3.00, 3.10 and 3.11, please read this file about more information
refer to NetWare installation manual for details during installation.

  Except for using the driver of ELAN2000,you can also
use the NE2000 as lan driver if you are the user of NOVELL
Netware ver 2.1X and later ver. however for the user of Netware
ver 2.0a who has no choice but to use drivers in V20A<dir>.

  NBE34.EXE is NETBIOS emulator; You will need it if you intend to
use the PC LAN or LAN MANAGER.

  The files in FTP_TCP <dir> are LAN adapter packet
drivers for FTP's PC/TCP network softwares. The readme file  under
the FTP_TCP <dir>  will direct you the installation details.

  If there is any conflict existing between the user manual and
readme files,the readme files shall prevail.




		 NetWare 386 DRIVERS USAGE EXPLAINATION
		 ======================================

This is the ELAN2000 Ethernet card Device Driver diskette.
It contains the following files:

      *  Software drivers for NetWare V3.00 server

      *  Software drivers for NetWare V3.1x server


The following diagram shows the directory structure of this diskette
about Netware 386:

   <root> ÄÂÄÄÄ README
	   ³
	   ÃÄÄÄ V3.00 <DIR> ÄÄÄÄ E2000.LAN
	   ³
	   ÀÄÄÄ V3.1X <DIR> ÄÄÄÄ E2000.LAN

I.  For install your NOVELL Netware 386 on your server :

    Please insert your Netware 386 Disk "SYSTEM-1", enter command

		A:SERVER

    Until you get the ":" server console prompt, then insert the DISK
    include the "INSTALL" NLM module and enter

		LOAD d:INSTALL

    for execute install procedure.
    Please refer to NOVELL NetWare 386 Installation Manual for details.

II. Procedure for Load Driver:

    Directory V3.00 contains E2000.LAN, an NLM module for  installing
    NetWare 386 version 3.00 file servers.

    Directory V3.1X contains E2000.LAN, an NLM module for  installing
    NetWare 386 version 3.1X file servers, It can also be running on Netware
    V3.10 and V3.11.

    Follow the 386 NetWare  installation  procedure  until  you  get the ":"
    server console prompt.  Enter  commands  listed  below  at	the  prompt  to
    install LAN driver into your server:

		 LOAD d:E000.LAN  <CR>
		 BIND IPX TO E2000 <CR>

    The drive letter d: is the physical location where "E2000.LAN" is placed.
    You will be prompted to select the proper LAN card configuration after  the
    program is loaded.

    If you want unload the driver from server, please enter :

		UNLOAD E2000.LAN

    More clear operation for Netware 386, please refer to your Netware 386
    manual.

III. Generate WorkStation Driver on your Netware 386 :

    S2000.LAN and 2000SH.OBJ files  can  also  be  used  to create NetWare 386
    version 3.x shell without any modification.

    Please copy the file "2000SH.LAN" in this disk, into the Disk "SHGEN-1"
    of Netware V3.00 and V3.10, or into the Disk "WSGEN" of Netware V3.11 .

    Then execute the file

		SHGEN <CR> (for Netware v3.00) or
		WSGEN <CR> (for Netware v3.11)

    You will be  prompted  to  insert  this  diskette (LAN_DRV_243) during
    create for linking object file 2000SH.OBJ .

    Please refer to NOVELL NetWare 386 Installation Manual for details about
    your WorkStation installation.


* NetWare is a registered trademark of Novell Inc.