Readme File for NDIS Driver Usage
=======================================
PAGE 1
1. Introduction:
The NDIS lan driver is designed for ELAN2000 series adapter.
The device driver conforms to the Microsoft/3Com Network Driver
Interface Specification(NDIS) which is a de facto standard in
the industry. The driver can be used in the DOS workstation of
LAN Manager or any network O.S. which support NDIS protocol.
2. Diskette Directory Structure:
The following directory structure is identical to the installation
diskettes of the LAN Manager with two exceptions. One is an added
level at the top of the directory named MSLANMAN.DOS, and the other
is an added readme file README.TXT in MSLANMAN.DOS directory.
<ROOT>
³
ÀÄÄMSLANMAN.DOS
³
ÃÄÄÄDRIVERS
³ ³
³ ÃÄÄÄETHERNET
³ ³ ³
³ ³ ÃÄÄÄEL2000.DOS
³ ³ ³
³ ³ ÀÄÄÄPROTOCOL.INI
³ ³
³ ÀÄÄÄÄNIF
³ ³
³ ÀÄÄÄEL2000.NIF
³
ÀÄÄÄREADME.TXT
The following describes the directory contents under the DRIVERS tree:
NIF Contains the NDIS Network Information Files that are
read by the setup utility.
ETHERNET Contains NDIS drivers and Protocol.ini files for
Ethernet cards. Each NDIS driver should have it's own
subdirectory by the name of the associated NIF file.
PAGE 2
3. NIF File Formats:
There are two information files in this diskette: EL2000.NIF and
PROTOCOL.INI. The EL2000.NIF file provides the information for
setup utility needs to coordinate and install EL2000.DOS driver. The
PROTOCOL.INI file is used by the LANMAN Protocol manager and netbind
program at startup time. This file contains the NDIS and Transport
specific parameters for the network.
>> NIF Format:
Model = ELAN 2000 adapter
Path = ethernet\EL2000
DeviceDriver = EL2000.dos
Type = NDIS
The following is a description of each field.
Model : A descriptive remark about the card. This entry is free form
and may contain any characters.
Path : Location of the files that are pertinent to the driver, i.e,
the Protocol.ini file and the driver itself.
DeviceDriver: The name of the device driver that is added to config.sys.
Type : Specifies the type of driver. (always assign NDIS)
>> PROTOCOL.INI:
A protocol.ini file must be created for the NDIS driver. The format for
the file is shown below.
IOBase = 0x300
Interrupt = 3
DriverName = EL2000$
This file describes the hardware configuration for your ELAN2000
Ethernet adapter, and the DriverName should assign a character string
(less than 8 octects) as a name for device driver EL2000.DOS.
PAGE 3
4. Installing the new driver:
a. After installation of your DOS Workstation of LAN Manager
, change the directory to the default root pathname
LANMAN.DOS and run utility SETUP.
b. Press enter to skip Full Help message box and select "Actions"
item:
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄMicrosoft LAN Manager SETUPÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
³Actions³ Options Exit
ÃÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ Install... ³
³ View/modify... ³
³ Save ³
³ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄij
³ Remove ³
³ Detach ³
³ Attach ³
³ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄij
³ Import network drivers ³
³ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄij
³ About Setup... ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
c. Select "Import network drivers" subitem and press enter to skip Full
Help message box and a message box will display like below.
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄMicrosoft LAN Manager SETUPÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄF1=Help
Actions Options Exit
ÚÄ Import Network Drivers Ä¿
³ ³
³ Source Drive: [A:] ³
³ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄij
³ OK <Cancel> ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
PAGE 4
d. You can decide for which drive you want to import network
drivers. When the drive has been selected a message box will show:
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄMicrosoft LAN Manager SETUPÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄF1=Help
Actions Options Exit
ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ Insert ³
³ a network driver disk ³
³ in drive A: ³
³ and press ENTER ³
³ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄij
³ OK <Cancel> ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
e. You must follow the indication of above message to insert
driver disk in drive a: and press ENTER then SETUP utility will
read the information file in driver disk and show the following
box.
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄMicrosoft LAN Manager SETUPÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄF1=Help
Actions Options Exit
ÚÄÄÄÄÄÄÄÄÄÄÄÄÄ Import Network Drivers ÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ ³
³ Network adapter cards: ³
³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³
³ ³[ ] ELAN 2000 adapter ³ ³
³ ³ ³ ³
³ ³ ³ ³
³ ³ ³ ³
³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ³
³ ³
³ Protocols: ³
³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³
³ ³................(Empty)................ ³ ³
³ ³ ³ ³
³ ³ ³ ³
³ ³ ³ ³
³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ³
³ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄij
³ OK <Cancel> ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
PAGE 5
f. Press Space Bar to select the driver (there are only one choice in
above message box) and press enter to download the device driver
from diskette to hard disk.
g. After above steps have been taken, you can return to the main menu
(refer b.) and select the subitem "View/modify..." to install this
driver on your LAN Manager DOS Workstation (refer LAN Manager
Installation Guide & Network Device Driver Guide in detail).
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.