1. es078.exe Driver
2. WFW311.TXT File Contents

WFW311.TXT Driver File Contents (es078.exe)

Windows for Workgroups 3.11 and Novell 3.XX or Novell 4 Clients
---------------------------------------------------------------

Windows for Workgroups and Novell Netware supports ODI 
specification drivers.

If using Novell Netware 3.11 the following Diskette is
provided with the Novell package WSGEN

If using Novell Netware 3.12 the following Diskettes are 
provided WSDOS-1; WSDRV-1; WSDRV-2; WSWIN-1

These diskettes have also been loaded on our Preloaded Novell 
Netware v3.12 File Servers in a directory

SYS:PUBLIC\CLIENT\DOSWIN

*********************************************************************

NETWARE CLIENT INSTALL

To install Network Support for a Elonex computer using WFW 3.11 
and Novell Netware 3.12.

NOTE: This is based upon a new Windows 3.11 configuration with 
no network support installed.

Either with the WSDOS-1 diskette in the A: drive or in the above 
directory type INSTALL at which the Netware Client Install Menu 
will appear.

Step 1 = The location where the support files are to be installed
	 Select as Necessary (Default=C:\NWCLIENT) 
	 *IMPORTANT NOTE: DO NOT INSTALL ON THE NOVELL SERVER

Step 2 = Select YES This puts statements in your Config.sys and 
	 Autoexec.bat files to activate drivers 

Step 3 = Install Windows Support: NO  Only install for Microsoft
	 Windows 3.1 DO NOT INSTALL with Windows for Workgroups. 
	 (Default Installation Directory=C:\WINDOWS)

Step 4 = Select the Network Card? Insert WSDRV_2 This will display a
	 list of Network Cards (SELECT THE CARD AS NEEDED).
	 Then select the parameters of your Ethernet Card
	 IRQ ? (5) PORT ? (320) FRAME ? (ETHERNET_802.3)

Step 5 = ACCEPT ALL ENTRIES AS ABOVE AND INSTALL DRIVERS
	 This creates the directory NWCLIENT, installs all the drivers.
	 Creates a NET.CFG configured for your network card, creates
	 file called STARTNET.BAT and edits Config.sys
	 and Autoexec.bat to put in following lines.

**********************************************************************

STARTNET.BAT                    NET.CFG
------------                    -------
@Echo off                       Link Driver NE2000
c:                                INT 5
cd\nwclient                       PORT 320
set nwlanguage=english            FRAME Ethernet_802.3
LSL
NE2000.com                      Netware Dos Requester                   
IPXODI                            FIRST NETWORK DRIVE = F
VLM                               USE DEFAULTS = OFF
CD\                               VLM = CONN.VLM        
				  VLM = IPXNCP.VLM      
				  VLM = TRAN.VLM
AUTOEXEC.BAT                      VLM = SECURITY.VLM
------------                    ; VLM = NDS.VLM
@Call C:\NWCLIENT\STARTNET        VLM = BIND.VLM
				  VLM = NWP.VLM
CONFIG.SYS                        VLM = FIO.VLM
----------                        VLM = GENERAL.VLM
LASTDRIVE=Z                       VLM = REDIR.VLM
				  VLM = PRINT.VLM
				  VLM = NETX.VLM

**********************************************************************

ADDITIONAL NETWORK CARD INFORMATION
-----------------------------------
If when selecting a Network card using Step 4 which is not in the list
provided by the Novell Installation, just select a NE2000 card, select
the setup options as required and continue to Step 5, after the drivers
have been installed edit the two above files with a text editor and 
where the entries for NE2000 are present replace with the name of your 
ODI driver supplied.

** Important Note **
-------------------- 
NETX may be used instead of VLM, If you replace this line, 
it will also be necessary to remove the LASTDRIVE=Z statement 
in your Config.sys file.

**********************************************************************
Windows for Workgroups peer to peer Network Setup 
and Novell 3.XX or 4
--------------------------------------------------

Select Windows Directory   C:\WINDOWS
  Type:  WIN <Enter>
		Select NETWORK Icon
			Select NETWORK SETUP
				Select NETWORKS

Select INSTALL MICROSOFT WINDOWS NETWORK
	Install support for additional networks
		Select OTHER

** If Using Novell Netware using ODI DRIVERS and NETX.EXE
		Select NOVELL NETWARE (WORKSTATION SHELL 3.XX)

** If Using Novell Netware using ODI DRIVERS and VLM.EXE
		Select NOVELL NETWARE (WORKSTATION SHELL 4.XX)

Select SHARING (Select As Necessary)

	Select ACCESS TO FILES - To give access to your local drive
	Select PRINT TO PRINTERS- To give access to a printer connected
				  to your station

Select DRIVERS

	Select ADD ADAPTER
		Select CARD   E.g. Novell/Anthem NE2000
			Select SETUP
				Select DRIVER TYPE      
					CHANGE TO ODI Driver
				Select OK

Driver should now show Novell/Anthem NE2000 (ODI/NDIS3)
		
	Highlight MICROSOFT NETBEUI
				Select SET AS DEFAULT PROTOCOL
			Select CANCEL
		Select OK

The unit will now ask for the location of the Netware
Windows driver to be loaded.
			
SEE LAST SECTION >>>>>>>>>>

******************************************************************
To Setup Windows for Workgroups 3.11 to run just
Novell Netware 3.xx or 4 
-------------------------------------------------

Select Windows Directory   C:\WINDOWS
  Type:  WIN <Enter>
		Select NETWORK Icon
			Select NETWORK SETUP
				Select NETWORKS

Select INSTALL WINDOWS SUPPORT FOR THE FOLLOWING NETWORK ONLY

** If Using Novell Netware using ODI DRIVERS and NETX.EXE
		Select NOVELL NETWARE (WORKSTATION SHELL 3.XX)

** If Using Novell Netware using ODI DRIVERS and VLM.EXE
		Select NOVELL NETWARE (WORKSTATION SHELL 4.XX)

SHARING is greyed out (NOT AVAILABLE)
DRIVERS is greyed out (NOT AVAILABLE)

Select OK

The unit will now ask for the location of the Netware
Windows driver to be loaded.
			
SEE LAST SECTION >>>>>>>>>>

*********************************************************************
LAST SECTION
------------
Both the above installations will be looking for the following
driver FILES contained on workstation boot diskette.
	
		NETWARE.DRV
		NETWARE.HLP
		VIPX.386
		VNETWARE.386
		NWPOPUP.EXE

** If Using Novell Netware using ODI DRIVERS and NETX.EXE
		NOVELL NETWARE (WORKSTATION SHELL 3.XX)
		Select SHELL.3XX directory

** If Using Novell Netware using ODI DRIVERS and VLM.EXE
		NOVELL NETWARE (WORKSTATION SHELL 4.xx)
		Select SHELL.4XX directory

**********************************************************************
DISCLAIMER
----------
THE ORIGIN OF THIS INFORMATION MAY BE INTERNAL OR EXTERNAL TO ELONEX.
ELONEX MAKES EVERY EFFORT WITHIN ITS MEANS TO VERIFY THIS INFORMATION.
HOWEVER, THE INFORMATION PROVIDED IN THIS DOCUMENT IS FOR YOUR 
INFORMATION ONLY. ELONEX MAKES NO EXPLICIT OR IMPLIED CLAIMS TO THE 
VALIDITY OF THIS INFORMATION.
ALWAYS TAKE PRECAUTIONS AGAINST DATA LOSS PRIOR TO ADJUSTMENTS
OF SOFTWARE CONFIGURATIONS. 
**********************************************************************
********************************************************************
AN\180294