DRIVERS USAGE EXPLAINATION ========================== With this ShineNet utility diskette,you will find the following files: 8630SH.OBJ A8630.OBJ B8630.OBJ C8630.OBJ D8630.OBJ 8630.LAN README V3.1X <DIR> The files in root directory 8630SH.OBJ.....8630.LAN are provided for the NOVELL NetWare ver 2.1X and later. Please refer to the ShineNet user manuals and NOVELL NetWare installation manual for details during installation. The files in directory V3.1X support for Netware 386 ver 3.10 and 3.11, please read this file about more information refer to NetWare installation manual for details during installation. Both NOVELL NetWare ver 2.1X server and workstation driver support "JUMPERS" utility function. You can configure LCS-8630 not only default configuration tables. Please refere to NetWare installation manual for details during installation. If there is any conflict existing between the user manual and readme files,the readme files shall prevail. NetWare 386 DRIVERS USAGE EXPLAINATION ====================================== This is the LongShine LCS-8630 Arcnet card Device Driver diskette. It contains the following files: * Software drivers for NetWare V3.1x server LCS8630.LAN I. For install your NOVELL Netware 386 on your server : Firstly, you must copy the Driver LCS8630.LAN in directory "V3.1X" into your Netware 386 Disk "SYSTEM-2". Please insert your Netware 386 Disk "SYSTEM-1", enter command A:SERVER Until you get the ":" server console prompt, then insert the DISK include the "INSTALL" NLM module and enter LOAD d:INSTALL for execute install procedure. Please refer to NOVELL NetWare 386 Installation Manual for details. II. Procedure for Load Driver: Directory V3.1X contains LCS8630.LAN, an NLM module for installing NetWare 386 version 3.1X file servers, It can also be running on Netware V3.10 and V3.11. Follow the 386 NetWare installation procedure until you get the ":" server console prompt. Enter commands listed below at the prompt to install LAN driver into your server: LOAD d:LCS8630.LAN <CR> BIND IPX TO LCS8630 <CR> The drive letter d: is the physical location where "LCS8630.LAN" is placed. You will be prompted to select the proper LAN card configuration after the program is loaded. If you want unload the driver from server, please enter : UNLOAD LCS8630.LAN More clear operation for Netware 386, please refer to your Netware 386 manual. III. Generate WorkStation Driver on your Netware 386 : 8630.LAN file can also be used to create NetWare 386 version 3.x shell without any modification. Please copy the file "8630.LAN" in this disk, into the Disk "SHGEN-1" of Netware V3.00 and V3.10, or into the Disk "WSGEN" of Netware V3.11 . Then execute the file SHGEN <CR> (for Netware v3.00) or WSGEN <CR> (for Netware v3.11) You will be prompted to insert this diskette (LAN_DRV_600) during create for linking object file 8630SH.OBJ . Please refer to NOVELL NetWare 386 Installation Manual for details about your WorkStation installation. * NetWare is a registered trademark of Novell Inc.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.