DRIVERS USAGE EXPLAINATION
==========================
With this E-LAN-2000 utility diskette,you will find the following
files:
2000.LAN
2000SH.OBJ
A2000.OBJ
B2000.OBJ
C2000.OBJ
D2000.OBJ
S2000.LAN
README
ELANCONF.EXE
FTP_TCP <DIR>
V3.00 <DIR>
V3.1X <DIR>
V4.00 <DIR>
DOSODI <DIR>
MSLANMAN DOS <DIR>
MSLANMAN OS2 <DIR>
WFW <DIR>
PCNFS <DIR>
The file ELANCONF.EXE is a configuration file for E-LAN-2000 Rev.E .
You just have to run it and follow the menu options.
The files in root directory 2000.LAN.....S2000.LAN are provided
for the NOVELL NetWare ver 2.1X and later.
Please refer to the E-LAN-2000 user manuals and NOVELL NetWare
installation manual for details during installation.
The files in directory V3.00, V3.1X and V4.00 support for Novell Netware
server ver 3.00, 3.1X and 4.0X, please read this file about more information
refer to NetWare installation manual for details during installation.
Except for using the driver of E-LAN-2000,you can also
use the NE2000 as lan driver if you are the user of NOVELL
Netware ver 2.1X and later ver.
The files in DOSODI <dir> are drivers supporting NOVELL ODI specification.
The files in FTP_TCP <dir> are E-LAN-2000 LAN adapter packet
drivers for FTP's PC/TCP network softwares. The readme file under
the FTP_TCP <dir> will direct you the installation details.
The files in MSLANMAN.DOS <dir> are drivers supporting DOS NDIS
standard. The details of the usage are shown in readme file in the
correspondent directory.
The files in MSLANMAN.OS2 <dir> are drivers supporting OS2 NDIS
standard. The details of the usage are shown in readme file in the
correspondent directory.
The files in WFW <dir> are drivers supporting WINDOWS FOR WORKGROUPS.
The details of the usage are shown in readme file in the
correspondent directory.
The files in PCNFS <dir> are drivers supporting PC-NFS
standard. The details of the usage are shown in readme file in the
correspondent directory.
NetWare 386 DRIVERS USAGE EXPLAINATION
======================================
This is the E-LAN-2000 Ethernet card Device Driver diskette.
It contains the following files:
* Software drivers for NetWare V3.00 server
* Software drivers for NetWare V3.1x server
* Software drivers for NetWare V4.00 server
The following diagram shows the directory structure of this diskette
about Netware 386:
<root> ÄÂÄÄÄ README
³
ÃÄÄÄ V3.00 <DIR> ÄÄÄÄ E2000.LAN
³
ÃÄÄÄ V3.1X <DIR> ÄÄÄÄ E2000.LAN
³
ÀÄÄÄ V4.00 <DIR> ÄÄÄÄ E2000.LAN
I. For install your NOVELL Netware 386 on your server :
Please insert your Netware 386 Disk "SYSTEM-1", enter command
A:SERVER
Until you get the ":" server console prompt, then insert the DISK
include the "INSTALL" NLM module and enter
LOAD d:INSTALL
for execute install procedure.
Please refer to NOVELL NetWare 386 Installation Manual for details.
II. Procedure for Load Driver:
Directory V3.00 contains E2000.LAN, an NLM module for installing
NetWare 386 version 3.00 file servers.
Directory V3.1X contains E2000.LAN, an NLM module for installing
NetWare 386 version 3.1X file servers, It can also be running on Netware
V3.10 and V3.11.
Follow the 386 NetWare installation procedure until you get the ":"
server console prompt. Enter commands listed below at the prompt to
install LAN driver into your server:
LOAD d:E2000.LAN <CR>
BIND IPX TO E2000 <CR>
The drive letter d: is the physical location where "E2000.LAN" is placed.
You will be prompted to select the proper LAN card configuration after the
program is loaded.
If you want unload the driver from server, please enter :
UNLOAD E2000.LAN
More clear operation for Netware 386, please refer to your Netware 386
manual.
III. Generate WorkStation Driver on your Netware 386 :
S2000.LAN and 2000SH.OBJ files can also be used to create NetWare 386
version 3.x shell without any modification.
Please copy the file "2000SH.LAN" in this disk, into the Disk "SHGEN-1"
of Netware V3.00 and V3.10, or into the Disk "WSGEN" of Netware V3.11 .
Then execute the file
SHGEN <CR> (for Netware v3.00) or
WSGEN <CR> (for Netware v3.11 and later)
You will be prompted to insert this diskette (LAN_DRV_243) during
create for linking object file 2000SH.OBJ .
Please refer to NOVELL NetWare 386 Installation Manual for details about
your WorkStation installation.
* NetWare is a registered trademark of Novell Inc.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.