1. es156.exe Driver
2. MSWFW311.TXT File Contents

MSWFW311.TXT Driver File Contents (es156.exe)

   Windows for Workgroups 3.11
                                                                    v1.00


Microsoft Windows* for Workgroups 3.11 installation notes for Intel's
EtherExpress(TM) PRO/100B LAN Adapter
=====================================================================

Location of Driver:     \NDIS\E100B.DOS


General Instructions
--------------------

NOTE: If you are running Novell NetWare* on this workstation, see the
      Novell NetWare section of Hints and Tips below before continuing
      with this installation.

1  Double-click the Network Setup icon in the Network Group.

2  If you are replacing a previous LAN adapter, click the Remove button
   to delete that adapter.

3  Click on the Add Adapter button.

4  Select Unlisted or Updated Network Adapter.

5  Insert the adapter driver disk in drive A and specify the path A:\NDIS
   for the location of the driver.

6  Select the Intel EtherExpress PRO/100B adapter.

7  Specify the correct Line Speed. We recommend using Auto-Detect unless
   you're not going through a Hub and are connecting two PCs directly
   with a crossover cable.

8  Click Close and restart your computer when prompted for changes to
   take effect.

Hints and Tips
--------------

Sample PROTOCOL.INI:

   Windows for Workgroups creates the PROTOCOL.INI for you. This is
   provided for reference. This is a sample with Microsoft Netbeui and
   IPX/SPX Compatible Transport with Netbios.
   
   [network.setup]
   version=0x3110
   netcard=ms$e100,1,MS$E100,2
   transport=ms$nwlinknb,NWLINK
   transport=ms$netbeui,NETBEUI
   lana0=ms$e100,1,ms$netbeui
   lana1=ms$e100,1,ms$nwlinknb
   
   [NWLINK]
   BINDINGS=MS$E100B
   
   [NETBEUI]
   BINDINGS=MS$E100B
   LANABASE=0
   SESSIONS=10
   NCBS=12
   
   [MS$E100B]
   Speed=0x0
   
   [E100B]
   Adapters=MS$E100B

Novell NetWare

   To install driver support for Windows for Workgroups and Novell
   NetWare on the same workstation, follow these steps:
   
   1  Set up the workstation to connect to NetWare using the DOS ODI
      client driver.
   
   2  Load the ODI driver and login to your NetWare server.
   
   3  Start Windows for Workgroups and set up the driver for the
      EtherExpress PRO/100 adapter by following the instructions shown
      above. When the driver is chosen, Windows for Workgroups detects
      the ODI driver is already loaded and automatically installs the
      appropriate support.



*  Third-party trademarks are the property of their respective owners