LAN Manager Workstation/Server v1.00 LAN Manager* 2.2 Workstation/Server installation notes for Intel's EtherExpress(TM) PRO/100B LAN Adapter ================================================================== Location of Drivers: /NDIS/E100B.DOS /NDIS/E100B.OS2 /NDIS/PROTOCOL.INI /NDIS/E100BDOS.NIF /NDIS/E100BOS2.NIF On a formatted blank floppy disk create the following disk structure: (for DOS) \MSLANMAN.DOS\DRIVERS\ETHERNET\E100B\E100B.DOS \MSLANMAN.DOS\DRIVERS\ETHERNET\E100B\PROTOCOL.INI \MSLANMAN.DOS\DRIVERS\NIF\E100BDOS.NIF (for OS/2*) \MSLANMAN.OS2\DRIVERS\ETHERNET\E100B\E100B.OS2 \MSLANMAN.OS2\DRIVERS\ETHERNET\E100B\PROTOCOL.INI \MSLANMAN.OS2\DRIVERS\NIF\E100BOS2.NIF Sample Configuration Files -------------------------- CONFIG.SYS (for DOS) will include these lines: DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /I:C:\LANMAN.DOS DEVICE=C:\LANMAN.DOS\PROTMAN.DOS /I:C:\LANMAN.DOS DEVICE=C:\LANMAN\E100B.DOS DEVICE=C:\LANMAN.DOS\DRIVERS\ETHERNET\E100B\E100B.DOS CONFIG.SYS (for OS/2) will include these lines: DEVICE=C:\LANMAN\DRIVERS\PROTMAN\PROTMAN.OS2 /I:C:\LANMAN.0S2 DEVICE=C:\LANMAN\PROTMAN.OS2 /I:C:\LANMAN DEVICE=C:\LANMAN\E100B.OS2 DEVICE=C:\LANMAN\DRIVERS\ETHERNET\E100B\E100B.OS2 PROTOCOL.INI will contain these lines: [E100B_NIF] ; PROTOCOL.INI section for the Intel EtherExpress PRO/100B ; Adapter DRIVERNAME = E100B$ General Installation -------------------- 1 Run the appropriate Microsoft LAN Manager setup for the computer you are setting up (DOS, OS/2 or OS/2 Server). When prompted for the LAN adapter driver, select "Other Driver" (the EtherExpress PRO/100B driver isn't included on the LAN Manager disk) and insert the PRO/100B driver disk you created. Select the EtherExpress PRO/100B driver and follow the directions. 2 When completed, reboot your computer in order for changes to take effect. Hints and Tips -------------- 1 Parameters for the PROTOCOL.INI file: DRIVERNAME: This is the one required parameter. See the example PROTOCOL.INI file earlier in this document for syntax. 2 Sample PROTOCOL.INI for LAN Manager: [PROTMAN] DRIVERNAME = PROTMAN$ DYNAMIC = YES PRIORITY = NETBEUI [NETBEUI_XIF] Drivername = netbeui$ SESSIONS = 6 NCBS = 12 BINDINGS = "E100B_NIF" LANABASE = 0 [E100B_NIF] ; PROTOCOL.INI section for the Intel EtherExpress PRO/100B ; Adapter DRIVERNAME = E100B$ * Third-party trademarks are the property of their respective owners.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.