1. es187_1.exe Driver
2. MPX.TXT File Contents

MPX.TXT Driver File Contents (es187_1.exe)

	Accton Technology Corporation
	    About MPX2 driver
	=============================

File Description
----------------

	a. MPX2PNP.COM is the Accton's new MPX2 DOS/ODI driver
		(\NETWARE\ODI\DOSODI\MPX2PNP.COM)

	b. ACCTON.COM is your workstation driver for NetWare 3.11 DOS/ODI.
		It is found in your Driver Diskette
		(\NETWARE\ODI\DOSODI\ACCTON.COM)

	c. ACCTON.LAN is your server driver for NetWare 3.11.
		It is found in your Driver Diskette
		(\NETWARE\ODI\3.11\ACCTON.LAN)


High performance MPX2 DOS/ODI driver
------------------------------------
MPX2PNP.COM is Accton's MPX2 DOS/ODI driver which can improve network
performance not only at Netware 3.11 but also Netware 4.xx.
To use MPX2PNP, it is not necessary to change server driver, just run
it at client site, then you can get big performance improvement.

	LSL
	MPX2PNP -----------> MPX2 workstation driver
	IPXODI
	NETX

Key points for high MPX performance
------------------------------------
This section describes steps to optimize its performance on NetWare 3.11
by Accton's old MPX driver.

1. Make sure to install an EN166x adapter in both
	the workstation and the file server.

2. Install both the workstation and the file
	server drivers respectively.

3. Before running the ACCTON.LAN server driver, modify
	the STARTUP.NCF file to include the following
	command line:

	SET MAXIMUM PHYSICAL RECEIVE PACKET SIZE = 4202

4. Use the Load and bind command to start the server driver.

Loading the NetWare workstation driver
--------------------------------------
A sample command sequence for running the workstation driver
follows. From your prompt, type the following command sequence
and press <Enter>:

	LSL
	ACCTON	-----------> MPX workstation driver
	IPXODI
	NETX



All trademarks or brand names mentioned are properties
of their respective owners.

--- the end ----